If you already have a personal OGM, you can still change your OGM when the memory is full. • Many local phone companies use Calling Party Control (CPC) to signal that a caller has hung up. Your system can recognize a CPC signal and release the line. • If memory reaches maximum capacity, while a caller is leaving a message, it stops recording and hangs up automatically. 7 5.2 Screening Calls To screen your calls, let the system answer. Listen to the caller’s message through the system’s speaker.

5.1 Select country for AUS/NZ CID operation Select AUS or NZ country mode using the switch located inside the battery compartment. Make sure that the answering machine is not connected to the telephone network before opening the battery compartment. When set to NZ position, the AM880 will insert 0/00 when using dial back feature from the CID log in accordance with Telecom NZ requirements. 5.2 Receiving calls During an incoming call, NEW appears and the New Call LED blinks while the phone is ring

To prevent feedback, do not take the Parent unit into the nursery/baby's room. Do not Press Talk button when the Baby unit and Parent unit are positioned in the same room. Feedback will be generated if the talk button is pressed when the Baby unit and Parent unit are to close to each other. 8 OpErATING ThE pArENT UNIT 5 Operating the Parent Unit Switching the parent unit on/off TURN ON - Press and hold this button until you hear 2 beeps. The Oricom logo appears then the image being taken by the

Australia 1300 889 785 Mon-Fri 8am – 6pm AEST New Zealand 0800 67 42 66 Mon-Fri 10am – 8pm NZST General Information General Information WARNING It is very important that you read the User Guide carefully as it contains detailed information on installation, programming and operational issues which you will need to be aware of to ensure the Care Phone operates properly. Following is a list of some of the important issues and important warnings which you need to be aware of. This is a summary of th

The alert sound when the temperature falls Timer Setting Set countdown timer The timer can be set to countdown from 1 minute to 99 hours 59 minutes. The TIMER icon [ ] is displayed along with the countdown time. Press [Menu] key and use [ ] or [ ] key to select "Timer", the display is shown below: Timer 1. Press [ ] key, "Countdown" is shown on the display. Press [ ] key. 2. Press [ ] or [ ]. "Set Time" is shown on the display. 3. Press [ ], then use [ ] or [ ] key to set the hour. 4. Press [ ],

Always retain your proof of purchase in case of warranty service and register your product on line at: AUSTRALIA: Q ricom. Table of contents General Information...............................................................2 Installation.............................................................................4 Wall Mounting........................................................................5 Location of controls...............................................................6 Basic se

Important Information Repair Notice Please be aware that the repair of your goods may result in the loss of any user-generated data (such as stored telephone numbers, text messages and contact information). Please ensure that you have made a copy of any data saved on your goods before sending for repair. Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being repaired. Warranty Informationrt Warranty Information (Austr

Using the optional headset You can use a headset with a 3.5mm plug (headset not supplied) to listen to the messages. simply plug in the headset to the socket in the rear of the Answering System. Operation Repeating previous message Press and hold the REPEAT button until you hear a tone to repeat the previous message. Repeating current message Press the REPEAT button to repeat the message currently playing. Skipping to next message Press the SKIP button once to skip the message currently playing.

* oricom. Premium DECT Digital Baby Monitor Secure 610 User Guide 2 TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION.......................................................3 GETTING STARTED..................................................................................6 ORICOM DIGITAL BABY MONITOR..........................................................7 SETTING UP..............................................................................................13 USING YOUR DIGITAL BABY M

Note: Low battery alert can be suppressed by pressing any button. Charging the Battery The Parent Unit will work for up to 10 hours with fully charged batteries. If a battery low warning beep is heard and the red Power light on the Parent Unit is fl ashing, you should put the parent unit on the Charger Pod to recharge the batteries. You can still use your Parent Unit from the Charger Pod. When charging, the red power light on the charger will light steadily. When you switch on your Parent Unit,