9 CIRCUIT DIAGRAM .............................................................................................. 16 TABLE 4-5 TABLES OF DELIVERY OF NOZZLES FOR HAND LANCES ...................... 17 TABLE 8 PROBLEMS, CAUSES AND SOLUTIONS .......................................................... 18 TABLE 7 TABLE OF PROGRAMMED MAINTENANCE .................................................... 18 TAB.10 ALLOWED FITTINGS .................................................................................

4 1.2 GUARANTEE ....................................................................................................................... 4 1.3 PRODUCT RESPONSIBILITY .............................................................................................. 4 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE ............................................. 4 2 SAFETY REGULATIONS AND RESIDUAL RISKS .............................................. 5 2.1 INTENDED USE .................................

= loosen the hand wheel of maximum pressure valve B completely (anticlockwise). = open volumetric valve E completely. = start the pump by activating the power-takeoff of the tractor at 540rpm = open main control A (position “ON”), the manometer will be activated = open the drain tap on filter F slightly (only ERGO and REMO).. = close volumetric valve E completely. If the pressure rises over the maximum limit of the system, make sure maximum pressure valve B is open (see previous indications) = o

Nevertheless, we list summarily a number of instructions to observe: Petrol mixture motors (two stroke): respect the percentage of oil present in the petrol and avoid the motor losing revs if the liquid contained in the cistern unexpectedly finishes. Petrol and diesel motors with electric starters: check the level of efficiency of the battery and carry out normal maintenance. Before starting check that the command lever of the pressure adjustor (lever A page 10) is in the discharge position; sta

6.2.2 LOW VOLUME CONICAL NOZZLES (150-500L/HA) Made of two ceramic pieces with colour-coded plastic inserts, they are available in various sizes identified by the colour (see table 3 page 32). They have been specifically designed to obtain a large number of small drops with strong turbulence even at low pressures (2-3 bar). This turbulence makes them suitable for penetrating luxuriant vegetation and so they are suitable for fungicides and insecticides. The nozzles of the TR Lechler and TXA Teeje

The specifications refer to environmental conditions with a temperature between -10° +50°C (14°C -122°F). The working temperature limit of the box is 90°C (200°F) established to prevent the ageing of the seals and guarantee a sufficient viscosity of the oil. The heat makes the air in the box expand and therefore increases the pressure inside. The correct use of the oil seals is guaranteed up to an internal pressure of 0.5 bar. Boxes designed to be used for particularly heavy duty work are equipp

Pay the greatest attention to all the warning and danger signs on the machine. Don’t use the machine for any other purpose other than that indicated in the manual. The machine has been designed and built with the appropriate devices to guarantee the safety of the user. In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictogr

Never lift or move the mistblowers by hand if there is liquid in the tank. The machine will weigh more and the movement of the liquid can change the centre of gravity causing uncontrolled movements. We recommend using slings as shown in the figure, the lifting points to use on the machine are indicated with the relevant symbol. Movimentare e sollevare la macchina Don’t lift the machine with the forks of a forklift truck because the machine can solo con cisterna vuota tip over due to the overhang

18 m. 23 m. Tab. 3215/0000F N.B. to obtain better agitaton in the tank, verify that the total lt/min. spray delivery does not exceed 75% of the pump delivery. For example, with an APS 121 select a maxium setting of 86 lt/min. N.B. to calculate the different ranges extension it is sufficient to multiply the value lt/hectare by the corresponding width indicated in the table and divide it by the new width (see chapter 6.3, page 20). Tabella erogazione in Litri/ettaro Cannone O455 6 getti + 2 latera

sing. 0,51 0,60 0,72 0,78 0,88 0,96 1,01 0,76 0,90 1,07 1,18 1,31 1,44 1,52 Litri/ha Litri/ha Litri/haVelocita Km/hVelocita Km/hspeed Velocita Km/hspeed speed Larghezza di lavoro working width 4 m. 5 m. 6 m. Tab. 3215/0000F unigreen 29 TABLES FOR CALIBRATING ATOMISERS TABLES FOR CALIBRATING ATOMISERS O650 TGZ unigreen spa PRESSIONE bar 3,5 4 5 6 7 3,5 4 5 6 7 3,5 4 5 6 7 Litri/min. ug. sing. Velocita Km/hspeedVelocita Km/hspeed Velocita Km/hspeed Tabella erogazione in Litri/ettaro Gr.Ventola O65