Please note that damage of this kind is not covered by the manufacturer’s warranty. R E P L A C I N G T H E P E N T I P The pen tip will wear with normal use. When the pen tip gets too short, you can replace it with one of the extra tips that came with the pen. To remove the old tip: To insert a new tip: Clasp it with a pair of tweezers, needle-nosed Slide it straight into the barrel of the pen. plier, or similar instrument and pull the old tip Firmly push the tip until it stops. The new straigh

has determined that this product meets the Energy Star© guidelines for energy efficiency. Copyright © WACOM Company, Limited, 2002 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product co

The Pen Tablet control panel makes it easy to customize the DTF-521 and pen. OPENING THE CONTROL PANEL To open the control panel, use the DTF-521 pen on the pen display: Windows. Click on the Windows START button and choose ALL PROGRAMS. (For Windows 2000, choose the PROGRAMS group.) Then select TABLET and choose the PEN TABLET PROPERTIES option. Macintosh. Open SYSTEM PREFERENCES from either the Dock, the Apple menu, or from the APPLICATIONS folder. Then click on the PEN TABLET icon. After open

See page 62 for signal specifications. Auto-sync: When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. At the native resolution of 1680 x 1050, the vertical refresh frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal frequency is between 30 to 82 kHz and the vertical frequency is between 50 to 75 Hz. If a specific resolution and vertical refresh frequency are not supported, you will see an “out of sca

The display unit will be held in place by gravity; there will be no audible ‘snap’ that indicates a mechanical lock. Note: If you do not need to rotate the Cintiq pen display, you may want to secure it to the stand with the rotation lock screws. For information on this, see Optional display configurations on page 56. To learn about other mounting options, see Using an alternate mount or stand on page 57. Bearing hub Bearing recess – A – Unpacking your Cintiq Page 9 WARNING When operating the in

No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual. The above date indicates the date wh