Assessments - 2, GPA: 4.5 ( )

Fabricante : Regency Arquivo Tamanho: 2.16 mb Arquivo Nome : Língua de Ensino:

No. Model Description Model Series 35” Square Pane Door, Painted 35” Square Pane Door, Satin Pewter SLDVT-35 H6098 SPDML35C H6099 SPDML35SP 40” Square Pane Door, Painted SLDVT-40 40” Square Pane Door, Satin Pewter H6100 SPDML40C H6101 SPDML40SP 45” Square Pane Door, Painted SLDVT-45 45” Square Pane Door, Satin Pewter SPDML45C SPDML45SP 30” Square Pane Door, Painted SLDVT-30 30” Square Pane Door, Satin Pewter SPDML40C SPDML40SP H6096 H6097 H6102 H6103 Screen Panel Kits Cat. No. Model No. Models Where Used H6112 PSFPKM30 SLDVT-30 H6113 PSFPKM35 SLDVT-35 H6114 PSFPKM40 SLDVT-40 H6115 PSFPKM45 SLDVT-45 SUPERIOR® DIRECT-VENTGASFIREPLACES•MODELSSLDVT-30/35/40/45•CAREANDOPERATIONINSTRUCTIONS SUPERIORSUPERIORDIRECT-VENT GAS FIREPLACES • MODELS SLDVT-30/35/40/45 • CARE AND OPERATION INSTRUCTIONS SUPERIORSUPERIORDIRECT-VENT GAS FIREPLACES • MODELS SLDVT-30/35/40/45 • CARE AND OPERATION INSTRUCTIONS LIGHTING INSTRUCTIONS – MILLIVOLT GAS VALVE FOR YOUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted with a piezo igniter. When lighting the pilot, follow these instructions exactly. B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. WHAT TO DO IF YOU SMELL GAS • Extinguish any open flame. • Open windows. • Do not light any appliance. • Do not touch any electrical switches. • Do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. • If your gas supplier cannot be reached, call the fire department. C. Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or an explosion. D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water. WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. LIGHTING INSTRUCTIONS 6. Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “B” in the safety information above on this page. If you do not smell gas, go to the next step. 7. Push in gas control knob slightly and turn counterclockwise to “PILOT.” 8. Push in control knob all the way and hold in. Immediately light the pilot by triggering the spark igniter (pushing the button) until pilot lights. Continue to hold the control knob in for about 1-1/2 minutes after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8. • If knob does not pop up when released, stop and immediately call your service technician or gas supplier. • If pilot will not stay lit after several tries,...

Baixe o seu

Para fazer o download, introduza 2 dígitos :