Ko#mon 9 ■■■■■=] 8 1310 <38 © /"! & A *- Q fcâ (B ÜP -* fnwvlli 9 8 H 4hV.«4.0 № Here are some items which can be adjusted as below, please press " J " to enter the item menu. • Clock: Press the "V" or "A" button to adjust the width of the screen. • Phase: Press the "V" or "A" button to reduce the noise on the screen. • Image Position a.H - Position: Press the "V" or "A" button to reposition the Image to the right or left. b.V - Position: Press the"V" button to move the Im

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

The best and easy way is to configure the PC to get an IP address from the WebShare 241 Router ADSL2+ (DHCP client). Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals. Before you configure this WebShare 241 ADSL Router2+, you need to know the following default settings: • Username:admin • Pass

Go to the Device Manager, the “Pocket USB ADSL WAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for WAN driver installation. 47 ENGLISH1.7 Configuration ENGLISH1.7 Configuration Follow the instructions below to configure your Pocket USB ADSL modem. 1. Click Pocket USB ADSL WAN (LAN) Adapter icon in the Control Panel or ADSL Configuration icon on the desktop. The status of ADSL connection will be displayed. 2. Press [Alt]+[P] on

Then, click “Finish”. 4. Pocket USB ADSL modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 5. Pocket USB ADSL modem icon is installed in the Control Panel. 6. Go to the Device Manager, the “Pocket USB ADSL LAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for LAN driver installation. Go to the Device Manager, the “Pocket USB ADSL WAN Adapter” is under the Network Adapters, and “Pocket

¦ Connect the USB cable to the USB port and connect the other end to the PC. 32 ENGLISH1.6 Installing I-Storm USB ADSL Modem ENGLISH1.6 Installing I-Storm USB ADSL Modem Drivers 1.6.1 For Windows 98 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. You will then see the following screen. Click “Next >”. 2. In the next window, select “Search for the best driver for your device” and click “Next >”. 33 ENGLISH 3. Insert the installation CD into

When it blinks, the printer connected is printing. 3 LAN Steady light confirms that the print server has a good connection to your network. ENGLISH When it blinks (briefly dark), the print server is receiving/ transmitting data from/to the network. 1.3 The Rear Ports Port Meaning 1 LAN The NetServer’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. 2 USB There is a fast USB connector located on the rear panel of the NetServ