Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação HP, Modelo HP NonStop G-Series

Fabricante : HP
Arquivo Tamanho: 69.63 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso



Himalaya S-Series Service-Side Door Add-On
Document History
Package Read Me
2. From the inside of the cable channel, use your fingers to install a KEPS nut
on the protruding end of that screw.
3. Insert a Phillips screwdriver through the access hole in the frame, then use
the screwdriver to tighten the Phillips screw while you hold the KEPS nut in
place with your free hand. See Figure 2.
Figure 2. Tightening a Phillips Screw in a Mounting Hole
3. Install the service-side door, including the faceplate and group ID label:
a.
Align the top, elongated mounting pin of the door with the top hinge of the
frame, then insert that mounting pin partway into that hinge.
b.
Verify that the bottom mounting pin of the door is aligned with the bottom hinge
of the frame, then lower the door to seat both mounting pins and secure the door
to the enclosure.
c.
Remove the faceplate from the door, insert the group ID label for the enclosure
in the faceplate, then reinstall the faceplate on the door.
Document History
This card supports G07.00 and all subsequent G-series releases until otherwise indicated
in a new edition.
Part Number
Product Version
Published
141618
N.A.
August 1998
Copyright
Copyright © 1998 by Tandem Computers Incorporated. Printed in the U.S.A. All rights
reserved. No part of this document may be reproduced in any form, including
photocopying or translation to another language, without the prior written consent of
Tandem Computers Incorporated.
Himalaya S-Series Service-Side Door Add-On Package Read Me–141618
2

...

Este manual também é adequado para os modelos :
Computadores - HP NonStop L-Series (69.63 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias