Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação HP, Modelo HP NonStop G-Series

Fabricante : HP
Arquivo Tamanho: 699.17 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


Preparing for OSM
Recommended SPR for Improved OSM
Performance
Recommended SPR for Improved OSM Performance
During periods of peak processor usage, OSM server performance is significantly
better if the NSK CRE/RTL (T1269) product is installed on the system rather than the
Native CRE/RTL (T8431) product. This is because of more efficient heap management
in T1269. T1269 is available on G06.15 and later SUTs. To learn more about migrating
to T1269, see Support Note S02001, “TNS/R CRE Heap Manager Migration
Considerations.”
For more information on OSM performance, including workarounds to consider if
T1269 is not feasible for your environment, refer to Support Note S03133A, “OSM
Performance Considerations.”
Upgrading the Server Software
To upgrade the server software required to run OSM, refer to these manuals:
• G06.xx Software Installation and Upgrade Guide
• DSM/SCM User's Guide
Use your currently installed TSM client and server software to perform any needed
firmware updates, system loads, or other necessary release version update (RVU)
tasks. After all RVU upgrade tasks have been completed and all OSM system and
client software has been installed and is operating properly, use OSM to perform
upgrade tasks when installing other RVUs or software product revisions (SPRs). For
information on using OSM for upgrading your system to a new RVU, refer to the
G06.xx Software Installation and Upgrade Guide.
Preparing the Hardware and LAN Environment
Installing system hardware and planning your network configuration are done much
like they were for TSM. While most OSM functionality should be used only on a
dedicated service LAN, some components can be used on a nondedicated operations
LAN (previously called “Public LAN”). To use OSM on a nondedicated operations LAN,
see Configuring Additional Stacks for OSM Connectivity on page 3-2.
For more information on preparing for an S-series environment that does not include
I/O Adapter Module enclosures, see:
• NonStop S-Series Hardware Installation and FastPath Guide – Describes how to
install, cable, and start your NonStop S-series server, NonStop system console,
and external system devices.
• NonStop S-Series Planning and Configuration Guide – Describes how to plan and
configure your NonStop S-series servers, operational environment, hardware and
software configurations, and ServerNet system area network (ServerNet SAN).
• Modular I/O Installation and Configuration Guide – Describes how to set up and
configure your I/O Adapter Module (IOAM) environment (for service providers only;
located in the Hardware Service and Maintenance collection in NTL).
OSM Migration Guide — 527273-008
2 -4

...

Este manual também é adequado para os modelos :
Computadores - HP NonStop L-Series (699.17 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias