Telecommande d’eclairage Modelo 995LM Security. Control Remoto de luz Light Control Actuator Learn Button Bouton LEARN Boton "APRENDER" (Learn) Commutateur de commande d’eclairage Actuador de control de luz Antenna Antenne Antena Learn Indicator Light Voyant indicateur d’apprentissage Luz indicadora de aprendizaje WARNING To prevent possible SERIOUS INJURY or DEATH from electrocution or fire, the light control is ONLY for indoor use. AVERTISSEMENT AVERTISSEMENTAVERTISSEMENT Pour eviter les risqu

NOTE: If programming into an existing network, ensure that the OTIUEX is programmed to the Active unit. 2 Features & Operation Answering Calls (Regular Mode) When visitor presses the Call button on intercom, the telephone connected to the OTIUEX will ring distinctively up to four times. If an expandable OTIUEX system is used all phones within the system will ring. When the phone is answered it will connect to the Intercom at gate or door. After connecting to the Intercom, the gate can be activat

NEVER permit children to operate, or play with remote control transmitters. • Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel. • ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door. INSTALLATION • Unplug the opener before proceeding. • OPEN RECEIVER: Insert a small screwdriver in slot on receiver front panel as shown. Twist up actuator cover. • C

Includes a modified second slider and a second door bracket mechanism. The operator is not effected. However, operator horsepower must be selected using the area (in square feet) of entire door opening. INSTALLATION INSTRUCTIONS Refer to the slide door instructions provided with the operator for operator mounting, electrical connections and operating instructions. Lift Master ■ ^ —w-- •»- k’ VÎWV KIT PART # DESCRIPTION K75-10471 Trolley Slider Kit For Bi-Parting Doors 01-13407B © 2005, T

Model WKP5LM can hold up to 5 PIN Numbers. Model WKP250LM can hold up to 250 PIN Numbers. Assembly Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.) Keypad will beep. Keypad will continuously beep indicating no Master PIN Number has been programmed. Proceed to Initial Setup. Keypad Initial Setup Step 1: On keypad press: Step 2: Enter 4 digit Master PIN Number. Example: 1234. ?? Multiple Keypads at Same Location Step 1: On secondary Keypad en

The Master PIN Number cannot be deleted. Erasing PIN Numbers “BEEP” “BEEP” “BEEP” ?? 51?? ?? 2 Mount Keypad Step 1 Choose mounting location for Keypad. Remove the back panel and attach it to a solid surface or post. Mount the Keypad onto the back panel with screws. Tighten screws with Allen wrench. Step 2 It is recommended that Keypad be mounted to a Gooseneck post or non-metallic surface. If it is necessary to mount Keypad to a metal surface, use a non-metallic spacer to move the Keypad away fr

When the sound wave is returned at a different frequency the sensor knows that there is a moving object within the detection zone. A signal is sent to the internal relay, which is wired to the door control’s activation input. FACTORY DEFAULT SETTINGS The Herkules has been pre-programmed to the following settings to make the installation easier and user friendly. If settings need to be changed refer to manufacturer’s instructions. Mounting Height..............13' to 16' above the ground Rela

This door control contains a motion detector that will automatically turn on the light when it detects a person entering the garage. This feature can be easily turned off for extended work light use. Locate the door control within sight of the door at a minimum height of 5 feet (1.5 m) where small children cannot reach, and away from moving parts of the door and door hardware. NOTE: After installation, an indicator light behind the cover will indicate proper connection. If not lit, the Lock and

The code between the remote control and the receiver changes with each use, randomly accessing over a billion new codes. The additional push buttons can also activate other garage door openers and/or light controls. (Instructions for programming light products are included with those accessories.) Instructions Are Described and Illustrated Below 1. Press and release the “learn” button on the motor unit. The learn indicator light will glow steadily for 30 seconds. 2. Within 30 seconds, press

• ALWAYS keep garage door in sight until completely closed. NEVER permit anyone to cross path of closing garage door. NOTE: Because radio control devices are inherently susceptible to RF interference, this product should NOT be used as a stand-alone security device. This product is considered a monitoring and notification device ONLY, and as such, should not be used as a substitute for a dedicated home security system. To ensure that your Garage Door Monitor continues to operate properly, the fo