Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet. COMBINATION 8X8 and 10X8 FLOOR KIT This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages of this instruction manual to build the floor size needed. If constructing an 8X8 storage building, you w

El regulador de la herramienta no esta fijado correctamente 3. El regulador de la linea o el del compresor estan fijados a un nivel muy bajo 1. Lubrique el motor neumatico y el mecanismo de impacto. (Lea las instrucciones de lubricacion de este manual) 2. Ajuste el regulador de la herramienta a lo maximo 3. Ajuste los reguladores en el sistema de aire Hace impacto rapida- 1. El mecanismo de impacto 1. a. Reemplace el mecanismo de impacto mente pero no saca los esta desgastado b. Devuelva la llav

If you believe that this unit is defective during its original two-year warranty period, return the unit with proper proof of purchase to the Home Depot store, or you may send the product to Husky Power Products at the address below. The warranty does not extend to subsequent purchasers or users. Husky Power Products will not be responsible for any amount of damage in excess of the retail purchase price of the product under any circumstances. Incidental and consequential damages are specificall

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference. Framing Nailer Note: This framing nailer is shipped with the BLACK single cycle mode trigger installed. Always know the operational mode of the nailer before using. Failure to know the operational mode could result in death or serious personal injury. Operational Modes This stick framing naile

Enamels, lacquers, polyurethane, urethane topcoats (including basecoat / clearcoat) and all primers can be applied. The spray gun has fluid, pattern and air controls and is supplied with a 1 quart anti-drip siphon cup. Description Le HDS750 est un pistolet vaporisateur à alimentation par siphon traditionnel conçu pour la pulvérisation de matériaux de viscosité légère - moyenne tels que l'émail, la laque, le polyuréthane, les enduits uréthanes (y compris couches de base/finition) et tous types

For best results, be sure to have all doors and windows closed in the area it is located. NOTE: Keep the unit away from any sources of dust or dirt such as woodworking equipment. HOSE SET UP Installing the Drainage Hose The drainage hose can be put out into any suitable area where water can be emptied. The hose can be run outside through a window, in a sink, or in a drain. Attention should be given to the flow of the drained water. Be sure it flows away from buildings and other objects tha

Operating Instructions Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Detail Spray Gun Description A conventional siphon feed detail spray gun designed to spray all light to medium viscosity materials. It has

Please take a few minutes and read through this manual before you ride your bicycle for the first time. Learning about this product and safe riding and maintenance will return many years of enjoyment and useful life. Throughout this manual, there are several important safety notes, which we recommend you read very carefully. Riding a bicycle is a sport, and like many sports, it involves taking the risk of injury and damage. Since most injuries result from unsafe riding or lack of proper maintena