DUCTING This style of range must be vented via ducting to the outside of the house. Follow general rules when ducting the hood: Use correct size of ducting (6" or 7” round ), do not reduce size of ducting, make all turns gradual, no short corners. If ducting ran will be longer than 10 feet enlarge duct by at least 1" inch diameter after each 10 feet. Tape all joints in ducting and all gasketed openings on hood for a tight seal. For round ducting from the top: For the gray plastic (included) over

pltitr rrad llirtr imfi nctiom roinjilrlrlv. ¡.IMPORTANT SAFETY INSTRUCTIONS-------------------------- ------1 1 SAFETY NOTES.......................................................... .....3 3.TOOLS AND MATERIALS REQUIRED................................. 3 4. INCLUDE THE FOLLOWING PARTS ACCESSORY PACKAGE- . „-3 5. PREPARING THE RANGE HOOD-----------------------------— -----3 6.PREPARING THE INSTALLATION LOCATION.................. ......4 7. PROVIDING ELECTRICAL POWER----------------------

Table of Contents A. Important Safety Instructions ---------------------------P. 1 B. Safety Notes ------------------------------------------------P. 3 C. Tools and Materials Required ----------------------------P. 4 D. Accessory Package ----------------------------------------P. 4 E. Preparing the Range Hood -------------------------------P. 5 F. Preparing the Installation Location ----------------------P. 6 G. Providing Electrical Power --------------------------------P. 7 H. Remove and Reinst

(Note different types of walls require different types of screws) Fig.8 Prepare and extend the duct cover to your desired height for mounting. Fig.9 Measure and balance the duct cover bracket at the desired height. A Fig. 10 Install the aluminum flex hose to the outlet of the hood. (Flex hose not included) Fig.11 Duct cover will come with “teeth” to be installed into the slot on the hood. Fig. 14 Evenly slide duct cover into the slot of the hood. Fig. 15 Attach duct cover to duct co