Consult a physicianbefore beginning any exerciseprogram with this equipment. If you feel faint or dizzy, immediately discontinue useof this equipment. Seriousbodily injury can occur if thisequipment is not assembledand used correctly. Seriousbodily injury can also occur ifall instructions are notfollowed. Keep others andpets away from equipmentwhen in use. Always makesure all bolts and nuts aretightened prior to each use. Follow all safety instructions inthis manual. When calling for parts orser

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).

55-1531) Pro Inversion System (Model Nos. 55-1536, 1536A and 1536B) 55-1531 55-1536 & 55-1536A 55-1536B During exercise, the unit may break at a weld in the center of the Inversion Table causing a person to fall off the Inversion Table and possibly injure himself or herself. The Inversion Tables have the name “Inversion Therapy Table” or “Pro Inversion System.” Only Inversion Tables with the following serial numbers are part of this recall: • “Inversion Therapy Table”: 05NOV000001 through 0

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).

NOTE: STEP 3: Make the tab in the edge of the OVAL ENDCAPS(58) face down, then press the OVAL ENDCAPS (58) into both ends of the front stabilizer of the MAIN FRAME(1). R L ASSEMBLY INSTRUCTIONS 8 STEP 5 CAUTION: Attach the UPRIGHT(3) to the MAIN FRAME(1) with the NYLOCK NUTS(M10x1.5)(84) and WASHERS (M10)(78). Plug the BASE CONNECTION WIRE(18) into the CONNECTION WIRE(19). STEP 6 Connect the LINKS(36) to the ROCKER ARMS(4) at both sides with D-SHAPED SHAFT(42), WASHERS (M6)(77), and BUTTON HEAD

The heart symbol " " will begin flashing when the computer senses your heart rate. Your heart rate will be displayed approximately five (5) seconds after the heart icon is displayed. If you do not place your hands correctly and 60 seconds passes without a heart rate reading, the computer will turn off the heart rate circuit. If this occurs, press the MODE button to restart the heart rate circuit, place your hands back on the Pulse Sensors correctly, and the heart rate readout will appear. PROGRA

Screw the FOOT STANDS(64) all the way up into the REAR STABILIZER(6) on both sides. STEP 5 Screw the STAND(68) all the way up into the bottom of the FRONT FRAME(1). Connect the PULSE EXTENSION WIRE(43) to the CONTROL WIRE(25). Insert the FRONT FRAME(1) into the REAR FRAME(5) and secure with BUTTON HEAD BOLTS(M10x1.5x20mm)(74), BUTTON HEAD BOLTS(M10x1.5x53mm) (75), ARC WASHERS(M10)(99), and LOCK WASHERS(M10)(101). Press the COVER PLUGS(67) into the holes in the LEFT and RIGHT REAR COVERS(65, 66).

Product May Vary Slightly From Pictured. DO NOT attempt or allow somersaults. Landing on the head or neck can cause serious injury, paralysis, or death even when landing in the middle of the bed. Do not allow more than one person on the trampoline. Always use two or more strong people to unfold and fold the trampoline. When unfolding, the rails will try to spring back into the folded position. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE RAILS TO SPRING BACK INTO THE FOLDED POSITION AN

It's a proven fact that a regular exercise program can improve your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to exercise. The Magnetic Fusion 4550 Bike provides a convenient and simple method to begin your assault on getting your body in shape and achieving a happier and healthier lifestyle. Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Read this manual carefully before using the