These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

This ma y cause damage to the projector. I n st a l l a t i o n Turning on the Projector POWER Remove the lens cover. Connect the projector’s power cable with the projector, and insert the power cable into a wall socket. Turn on the AC power switch of the projector. The power indicator lights green and slowflashing. Projector works in standby mode. Press the power button to turn on the projector. The power LED begins to green and lamp LED begins to red, and the projector will be lamped on. Insta

. • PC Adjust Menu cannot be selected when Input 1[RGB (PC digital)] is selected in the Input Menu (p.35). Image Level Selection Image Level Selection Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired image level and then press the SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projec

AUTO IMAGE FUNCTION Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated “ON” in the AUTO IMAGE FUNCTION are adjusted automatically. If all the items in AUTO IMAGE FUNCTION are “OFF”, AUTO IMAGE SETTING display appears. If you wish to operate the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of “AUTO IMAGE FUNCTION” section on page 39. MENU OPERATION In MENU OPERATION mode, you can adjust the projector. You can use the TOP CONTROL OF THE PROJECTC or th

5%) Signal To Noise Ratio Audio: Output Speakers Speaker Jacks Dimensions (H x W x D) Weight Packaged Weight Power Requirements Power Consumption Safety Compliance Warranty -Unit 40dB 100mm (4") round x 1 1/4", 4 Ohm x 1 2.75" x 11.5" x 7.125" 4 lbs. 5.48 lbs. without batteries AC 120 Volts, 60Hz, DC 12 Volts (6 "C" size batteries) 10 W approximately UL Listed 1-Year limited warranty from date of original purchase for parts and labour. Specifications subject to change without notice.

Use the Point 7 8 buttons to adjust the setting value. Contrast Press the Point 7 button to decrease contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color . Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63). Tint . Press the Point 7 8 buttons to

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the imag

Image Projection Image Projection Displaying the Black Screen This function allows you to temporarily display the black screen. 1 BLACK SCREEN Press . button 2 ЎProjected Image Pressing again will turn the projected image back on. Displaying and Setting the Break Timer This function allows you to show the remaining time for break during meeting. 1 Press . 2 While “ ” is displayed, press ', ", \ or | to set the break timer. • You can set anywhere between 1 and 60 minutes (in 1 units). • The break

Jack (3.5mm) Remote pause jack (2.46mm) OPTIONAL ACCESSORIES 3279A Standard headset Remote control microphone Specifications Type Frequency Response Wow & Flutter Battery or AC Operation Remote Microphone Jack Auxilary Input Jack Remote Pause Headset Jacks Audio Output: Portable AC/battery recorder player 125Hz to 8 KHz 0.30% AC/DC (6"C") 1/8" (3.5mm x 1) 1/8" (3.5mm x 1) 1/10" (2.46 mm) x 1 %" x 4 Amplifier 1 Watts RMS (D.H.T. 5%) Signal To Noise Ratio Audio: Output Speaker Jacks Dimens

Eiki's incredibly durable high-impact ABS body is built to endure years of punishment. Comfortable, full-size controls: Play, record, fast rewind, fast forward/cue, pause and stop/eject keys. Braille raised symbols on keyboard for the vision impaired. Side-mounted listening center jacks allow private listening for up to 7 people with headsets. Built-in electret condenser microphone with automatic and manual recording level controls. Automatic Tape Stop and power shut-off in all modes. Stand