Make sure that none of these parts are missing before beginning installation. If there are parts missing stop the installation and contact Premier Mounts. INW42 Plenum INW50 Plenum INW60 Plenum (4) 6/32” Hex nuts (3) 10/32” Kep nuts (4) 6/32” Phillips screws (1) Muffin fan (1) Muffin fan bracket Opening the wall structure Opening the wall structure NOTE: It is assumed that the room ambient air temperature and conditions where the INW-series is to be incorporated is suitable to maintain an accept

Available in dark gray. PP-TBL Suggested List: $199.99 Chassis Sleeve Security System 18" steel cable. Includes: (1) cable looper guide, (1) steel chassis sleeve, (1) key cylinder lock. PCB-CSL1 Suggested List: $39.99 SECURITY DEVICES Dual-Cable Security Device This security device's unique design secures the mounting points on the chassis as well as two of the mounting points at the ceiling or wall. Includes: (2) steel chassis sleeves, (2) aircraft-grade plastic-sheathed braided-steel

Wt. RTM-C Bracket Only RTM-CS 26"-37" 125 lbs. (57 kgs.) RTM-CL 37"-61" 160 lbs. (73 kgs.) RTM-CS mated to AST-2446 pole (optional) Ba Premier Mounts8 800.368.9700 I www.mounts.com

UB-T781 UB-T781W UB-T761 Installation Manual Included (for qualified service personnel) • To assemble this unit, please refer to the Installation Manual on pages 37 through 60. • Before operating this unit, please read these instructions completely and keep them carefully for future reference. • This unit is designed for installation by a qualified servicing dealer. Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment. For

3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw. 4. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3), until you find one that comes closest to your mark without going past. Inverted Flat Panel Display Marking the Depth Thread Insert Thread Depth Indicator MarkingScrewMarkingScrew Thread Depth Thread Depth Indicator Indicator Page 6 Installation Instructions AM3/AM3-B Mount Orientation The AM3/AM3-B

(73 kgs.) 60"+ Wall 300 lbs. (136 kgs.) CTM-MS2 is ideal for floor stands and carts. Premier Mounts* CTM-MS4 Dimensions are in inches and millimeters [mm]. Drawings are subject to change without notice. 800.368.9700 I www.mounts.com

Secure the pan to the wood stud frame using nails or wood screws (commercially available). See figure 2. NOTE: A standard “handy box” extension ring can mount directly to the inside of the pan at the knock out points to provide an A/C power duplex outlet mounting point. Step 3 Install the muffin fan to the mounting bracket (refer to the muffin fan manual for air flow position). Secure the muffin fan with the four (4) 6/32” hex nuts and Phillips screws (supplied) See figure 3. Mounting studs for

Accessories & Adapters Multi-Projector Stackable Cage This stackable, protective cage can be used singly, or several may be connected to each other, top to bottom or left to right. Manufacturer Christi Eiki Sanyo Panasonic Model PCS-5GGG Compatible Models LX12G, LX15GG LCXT4, LCXT5, LCXT9 PLCXF42, PLCXF46N, PLCXF47 PTD-W1GGGGU Top View Premier Mounts

Insert two (2) 5/16” x 3” lag bolts and washers into the mounting holes and tighten (see WARNING: below Place a level (supplied) on the top rail and make sure that the mount is level. Once the mount is level, Drill pilot holes in the lower mounting slots and install two (2) 5/16” x 3” lag bolts and washers into the mount ing holes and tighten. Do NOT over-tighten lag bolts when attaching the mount to the wall. Improper installation may result in personal injury or damage to property. If the stud

NO USERSER-VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A SA 1965 SA 1966 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating