• Visually check the appearance of the main burners, all burners should have a nice blue flame. • Make sure that all gas connections have not been tampered with or damaged, check for leaks with a soapy water solution. Never use an open flame to check for leaks. • Check to see that the flue exhaust area has no food debris, or blocked in any way. Never allow the flue to become excessively dirty. The flue being free of obstruction is imperative to proper burner operation. L25-052 Rev. 0 (5/06) Clea

WARNING DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance. WARNING Installation, maintenance and repairs should be performed by a MagiKitch’n Authorized Service and Parts (ASAP) company technician or other

Box 501 Concord, NH 03302-501 509 Route 3A Bow, NH 03304 Phone: 603-225-6684 Fax: 603-225-8497 Use and Care Instructions for (Typewriter comment blank) (Typewriter comment blank) Model #CG-60 and CGL-60 Outdoor Charcoal Grill (Typewriter comment RETAIN THIS MANUAL FOR FUTURE REFERENCE) FOR YOUR SAFETY * Do not store gasoline or other flammable vapors or liquids in the vicinity of this appliance. * Keep area around appliances free and clear from combustibles * For installation in non-combustible

CONCORD, NH 03301 TEL: 800-258-3708 • 603-225-6684 • FAX: 603-225-8497 L25-050 Rev. 0 MKG SERIES GAS GRIDDLE INSTALLATION & OPERATION THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE FOR YOUR SAFETY DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly bef

CAUTION Only two of the four supplied casters are equipped with a locking feature. Install the griddle so that the two locking casters are at the front of the unit. The casters should be LOCKED before the unit is placed into operation. (See Figure 4). To mount the griddle to the stand, locate joining kit supplied with stand. The joining kit should include (2) rear mounting brackets, and (4) 1/2" mounting bolts. To mount the griddle to the equipment perform the steps on the following page: Figure

Chrome Plated Cooking Surface..................................................................................................13 5.3. MONTHLY MAINTENANCE.............................................................................................................13 5.3.1. Monthly Preventative Maintenance ..............................................................................................13 5.4. ANNUAL/PERIODIC PREVENTATIVE MAINTENANCE AND INSPECTION ....................................

Operating Performance The following chart may help to diagnose any operational issue you may be experiencing with your appliance. Some issues may REQUIRE that a qualified service technician perform the repairs. If a qualified service technician is required, please contact the factory service department (1-800-647-4826). Possible Cause Manual Gas Valve Or Gas Supply Turned Off/ Disconnected Unit Not Plugged In (Matchless Units Only) Faulty Piezo Ignitor/ Thermopile/ Or Wiring Power Switch(s) Off

Sear food fast, providing distinct brand marks for great taste and presentation. Thick walled steel frame resists warping and cracking for long life. TAME THE FLAME - Round rods help control grease and flare-ups. In the tilt position. 70% of grease is gravity drained into the grease collection box. STICK RESISTANT SURFACE - Round rods will not press into your food which results in improved branding with less sticking or tearing. Optional hard-chrome-plated steel rods further help prevent food fr

2.2.2. Surface Temperature Check 1. If available, place grill surface thermometer over each thermostat sensing probe 12" from the front edge of the griddle surface. The first sensing probe is located 6" from the left side of the griddle, additional sensing probes are every 12" to the right thereafter. 2. Heat the griddle up to the desired cooking temperature; check the surface temperature reading on the grill thermometer. If necessary, adjust the thermostats that control any area of the surface