This symbol on the product or its packaging indicates that the product may not be treated as household waste. Instead it should be handed over your local community waste collection/ recycling centre. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused. For more detailed information about recycling of this product, please contact your local council, your household waste dispo

. Load Button This function allows the dishwasher to wash dishes using only the upper rack if there are not enough dishes for a full load. This will allow you to save on water and energy consumption. To select . load: 1. Select the programme and then press the . load button (Fig.2-17) – the . load indicator blinks. 2. Close the door. The programme starts automatically. To cancel the . load 1. Open the door slightly. 2. Press the programme button and hold it in for about 3 seconds. Please keep in

Before You Start . Overview and Operation . Looking after your Dishwasher . Troubleshooting . Installation . General Information . Circuit Diagram . Technical Data 1. Before You Start At Time of Delivery Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged DO NOT USE. Contact your supplier or customer services. Please dispose of packaging materials properly. During Installation • Site the dishwasher and connect in accordance with the installation

This chimney hood is designed to be fixed to any vertical surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode. The installation work must be undertaken by a qualified and competent person. RANGEMASTER Consumer Products disclaims any responsibility for damage due to incorrect installation of the chimney hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation. 10 (Square) (Square) (S

Use proper pan size-select pans having flat bottoms large enough to cover the surface unit’s heating area. The use of undersized pans will expose a portion of the surface unit to direct contact and may result in ignition of clothing. Proper relationship of pans to surface unit will also improve efficiency. Do not allow anyone to climb, stand or hang on any part of the cooker. Do not use aluminium foil to cover shelves, linings or the oven roof. Make sure that your kitchen is well ventilated at a

RANGEmaster GLX490 RM GALAXY HOOD GLASS Instructions Manual Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS.....................................................................................................................3 CHARACTERISTICS.............................................................................................................................................................4 INSTALLATION......................................................................

INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood. • For Class I appliances, check that the domestic power supply guarantees adequate earthing. • Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible. • Do not connect the extractor

• Never leave frying pans unattended during use as overheated fats and oils might catch fire. • Never do flambe cooking under this cooker hood. • Do not leave naked flames under the cooker hood. 2 IMPORTANT SAFETY INFORMATION • MAINTENANCE AND SERVICE • This appliance can be a hazard if the grease filters and charcoal filters are not cleaned and replaced as recommended. • Always insist on genuine RANGEmaster spare parts. • The halogen light and cover lamp might hot. • Under no circumstances shou

• The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fi xed to the inside of the hood. • For Class I appliances, check that the domestic power supply guarantees adequate earthing. Connect the extractor to the exhaust fl ue through a pipe of minimum diameter 120 mm. The route of the fl ue must be as short as possible. • Do not connect the extractor hood to exhaust ducts carrying comb