• Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • NOTE: Read entire instruction sheet before you start installation and assembly. NOTE: Read entire instruction sheet before you start installation and assembly. • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer ca

North Ave. Melrose Park, IL 60160 708-865-8870 800-865-2112 Fax 708-865-2941 page 1 of 2 © 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. MODELS: PRS 35, PRS 35-S, PRS 35-W, PRS 40, PRS 40-S, PRS 40-W, PRS 45, PRS 45-S, PRS 45-W The PRS Series Clamp-Style Universal Projector Mou

Blocked vents may cause damage to the projector. A R C H I T E C T S S P E C I F I C A T I O N S The PRS Series Clamp-Style Universal Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It shall feature 25°(+5°/-20°) pitch, 20°(+10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the proje

ISSUED: 1-26-04 SHEET NO: 055-9819-1 3215 W. North Ave. Melrose Park, IL 60160 708-865-8870 800-865-2112 Fax 708-865-2941 © 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. SHIP SHIPPING CARTON MODEL # WEIGHT WEIGHT DIMENSIONS PRS 35, PRS 35-S 5.5 8 12.25 x 9.625 x 4 PRS 35-W (2.5

The open sides of the cross chain hooks must be facing away from the tire when the chain is installed. Make sure all twists are out of the chain assembly. A this side Position the side chain with the fingertip hook to go on the inside of the tire (toward body of the machine/vehicle). As a result, the side chain with the outside fastener will then be positioned to go on the outside of the tire. 2 Grasping the middle of the inside fastener side chain, lift and drape the chain assembly over the

CENTER BRACKETS VERTICALLY ON BACK OF SCREEN X CC X Note: "X" dimensions should be equal. KNOBS FACE OUT BB fig 2.1 NOTES: • Always use multi-washers when attaching tilt brackets (BB and CC) to your screen when using small, medium or large screws. No multi-washer is required for extra large (M8) screws. • Use the corresponding hole in the multi-washer that matches your screw size as shown in fig 2.2. MULTI-WASHER fig 2.2 MEDIUM HOLE FOR M5 SCREWS LARGE HOLE FOR M6 SCREWS SMALL HOLE FOR M4 SCREWS

A R C H I T E C T S S P E C I F I C A T I O N S The PRS Series Clamp-Style Universal Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It shall feature 25°(+5°/-20°) pitch, 20°(+10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall be constructed of aluminum alloy f

Features: • +5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension column), +/-15° Yaw (when flush mounted), which enables the image to be perfectly aligned with the screen • Mount completely pre-assembled to save you time • Independent roll, pitch, and yaw adjustments provide easy image alignment • Can be mounted directly to a single wood beam or concrete slab without disassembling the mount and without reinforcing the ceiling • Can attach to 1 1/2" extension column, 3/4" extensio

WIDTH (A) 12.75 (324) 16 (406) 20 (508) MAX. WIDTH (A) 2.5 (64) 3.75 (95) 5.25 (133) MIN. HEIGHT (B) 4.75 (121) 6.5 (165) 11 (279) MAX. HEIGHT (B) OUTSIDE DIMENSIONS / / / MIN / MAX MODEL # C PRS 35, PRS 35-S PRS 35-W PRS 40, PRS 40-S PRS 40-W PRS 45, PRS 45-S PRS 45-W 1.4 (36) 1.3 (33) 3.5 (90) 3.3 (84) 3.8 (97) 8.2 (208) PRS 35, PRS 35-S PRS 35-W PRS 40, PRS 40-S PRS 40-W PRS 45, PRS 45-S PRS 45-W 7.5 (191) 8.5 (216) 10.75 (273) 11.5 (292) 14.75 (375) 18.75 (476) 2 (51) 3.25 (83) 5.5 (140) 3.7

WIDTH (W) MAX. WIDTH (W) MIN. HEIGHT (H) MAX. HEIGHT (H) INSIDE DIMENSIONS YAW360° (when attached to an extension column), +/- 15° (when flush mounted) SIDE VIEW C PITCH+5°/-20° TOP VIEW ROLL+10° L C B W FRONT VIEW 5.5 (140) 2.2 (56) 4.6 (117) All dimensions shown as: inch (mm) lb (kg) Maximum Load Capacity: 25 lb (11.3 kg) H