The time limitation (seconds) is from 1 ~ 4095 46 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual 3.2.5 Security Configuration Figure 3-9 Security configuration Only configure the authorized IP This option is enabled in order to protect all configuration settings from being changed inadvertently. Allow any IP to access If this option is enabled, any PC can access data from this ADAM-4570/ADAM-4571/EDG-4504. The specified IP which can access If you do not want many PCs to have the access right, you ca

In the mode, all connections have to use the same serial setting. If one serial setting of these connections is different from others, the data communication may operate incorrectly. There are two kinds of Multi-access function. One is Normal mode; another is Round- Robin mode. • Normal mode: Disabling “Response Timeout” parameter, EKI-1351/1352 will operate in “normal mode”. When multiple hosts open the serial port simultaneously, the EKI-1351/1352 only offers control ability to the first conne

THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. v Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. 2. Disconnect power before making any configuration changes. The sudden rush of power as you con

You should read the instructions in CD-ROM Disk Touchscreen section carefully before you attempt installation. The FPM-3150G-XCE, RCE need to install Penmount 6000 driver. Please find Penmount 6000 folder and install the driver into your system. Note 1: The driver manual are examples only. You must follow the flow chart instructions and pay attention to the instructions which then appear on your screen. Note 2: The USB & RS-232 cable not allow to connect to system at the same time. Note 3: US

All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infrin

For the external test, you will need to connect each port to a loopback tester. The test 4 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual is divided into two parts: Signal test and Communication Parameters test. If the results are OK, users can be sure the communication quality between host PC and ADAM-4570/ 4571 is OK. Easy to maintain by downloading firmware remotely Advantech continually upgrades ADAM-4570/ADAM-4571/ EDG-4504’s firmware to keep pace with the ever-expanding world of computing. You

18 3.2 Chassis Grounding .......................................................... 18 Figure 3.1:Chassis Grounding Connection...................18 3.3 Connecting Power ........................................................... 19 3.4 Installing a Hard Disk ..................................................... 19 3.5 Installing a Wireless LAN Card and Antenna................. 20 3.6 BIOS Setup...................................................................... 22 vii Table of Contents Appendi

PCI Bu. User's manua. Copyrigh. This documentation and the software included with this product are copyrighted 1998 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is inte

Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, whic

...5 3 1 44 42 40... ...6 4 2 Table D-7: EIDE Hard Disk Drive Connector (J7) Pin Signal Pin Signal 1 IDE RESET # 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12 DATA 12 13 DATA 2 14 DATA 13 15 DATA 1 16 DATA 14 17 DATA 0 18 DATA 15 19 SIGNAL GND 20 N/C 21 HDD 0 22 GND 23 IO WRITE 24 GND 25 IO READ 26 GND 27 HD READY 28 N/C 29 HDACK 0 # 30 GND 31 IRQ14 32 N/C 33 ADDR 1 34 N/C 35 ADDR 0 36 ADDR 2 37 HDD SELECT 0 # 38 HDD SELECT 1 # 39 IDE ACTIVE 0 # 40