Log: NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION: The exclamation point within an equilateral triangle is intended to alert
10NDL64 Mid-Bass 500 Wcontinuous program power capacity 64 mm (2.5 in) aluminium voice coil 50 - 3000 Hz response 97 dB sensitivity Neodymium magnet allows a very light yet powerful motor assembly Ventilated voice coil gap for reduced power compression LF Nd Drivers Specification Nominal Diameter 250 (10) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7 Ohm Nominal Power Handling (2) 250 W Continuous Power Handling (3) 500 W Sensitivity (1W/1 m) (4) 97 dB Frequency Range 50 -
Power calculated on rated minimum impedance. ^Power on Continuous Program is defined as 3 dB greater than the Nominal rating. ^Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. ®12 dB/oct. or higher slope high-pass filter.
horizontal coverage 140° 100 W continuous program power capacity 44 mm (1.7 in) aluminium voice coil Polyimide diaphragm 1200 - 18000 Hz response 108.5 dB sensitivity Horns Specifications Horizontal Coverage 140° max Active Radiating Factor 92.5 % Recommended Crossover (1) 1.5 kHz Waveguide Material Cast Aluminium Nominal Impedance 8 ohm Minimum Impedance 7.7 ohm Nominal Power Handling (2) 50 W Continuous Power Handling (3) 100 W Sensitivity (1W/1 m) (4) 108.5 dB Frequency Range (5)
8PE21 Midrange 400 W continuous program power capacity 50 mm (2 in) copper voice coil 90 - 5000 Hz response 98 dB sensitivity Shorting copper cap for extended HF response i 1 IT i J I / *1 1 ■ft 1 r f 'ft An 1 \\ Jy) u <0 C o X ¥
Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. ^Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. ^12 dB/oct. or higher slope high-pass filter. ©
The particular mylar/titanium diaphragm using a 3" edgewound flat aluminium wire voice coil and a FEA computer optimized lightweight Neodimium magnet assembly using a copper shorting ring result in excellent response characteristics, very high efficiency and outstanding upper end performance. The DE 950 features one of the highest magnetic fields currently available. This unit weights only 2.8 kg. Recommended for low crossover frequencies. Ap A
ft.) Sd 220 cm.2 (34.1 sq. in.) no 3.4 % X max ± 1 mm. Mms 15 gr. Bl 12.7 Tm Le 0.3 mH Mounting and Shipping Informations Overall Diameter 225 mm. (8.8 in.) Bolt Circle Diameter 210 mm. (8.3 in.) Baffle Cutout Diameter 187 mm. (7.4 in.) Depth 89 mm. (3.5 in.) Flange and Gasket Thickness 9.5 mm. (3/8 in.) Net Weight 4.4 Kg. (9.7 lb.) Shipping Weight 4.7 Kg. (10.3 lb.) Shipping Box 220x220x130 mm (8.7x8.7x5.1 in.) 1 2 hours test made with continuous pink noi
DE750TN HF Drivers 220 W continuous program power capacity 2” horn throat diameter 75 mm (3 in) aluminium voice coil Titanium diaphragm 500 - 18000 Hz response 107.5 dB sensitivity Shorting copper cap for extended HF response A J r VA HF Drivers Specifications Throat Diameter (1) 50 mm (2 in) Nominal Impedance (2) 8 ohm Minimum Impedance 7.8 ohm Nominal Power Handling (3) 110 W Continuous Power Handling (4) 220 W Sens
