Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. SoftAP™ is the registered trademark of PCTel. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. PART NUMBER 5991-0114 Wireless LAN 802.11b/g Device Table Of Contents 1 Introduction..........................................................................

The ES4650 provides 48 fixed 1000MB port (4 of which are fixed 1000MB Combo fiber cable port/copper cable ports) and 2 10GB XFP ports. ES4626/ES4650 can seamlessly support various network interfaces from 100Mb, 1000Mb to 10Gb Ethernets. We are providing this manual for your better understanding, usage and maintenance of the ES4626/ES4650. We strongly recommend you to read through this manual carefully before the installation and configuration to avoid possible damage and malfunction to the switc

Powered by Accton 24/48 10/100 Ports + 2GE Intelligent Layer 2 Management Guide Fast Ethernet Switch Management Guide Management Guide Fast Ethernet Switch Layer 2 Standalone Switch with 24/48 10/100BASE-TX (RJ-45) Ports, and 2 Combination Gigabit Ports (RJ-45/SFP) ES3526XA ES3552XA F2.2.6.3 E122006-CS-R02 149100005500H Contents Chapter 1: Introduction 1-1 Key Features 1-1 Description of Software Features 1-2 System Defaults 1-5 Chapter 2: Initial Configuration 2-1 Connecting to the Switch 2-1 C

It includes a management agent that allows you to configure the features listed in this manual. The default configuration can be used for most of the features provided by this switch. However, there are many options that you should configure to maximize the switch's performance for your particular network environment. Key Features Table 1-1. Key Features Feature Description Configuration Backup and Restore Backup to TFTP server Authentication Console, Telnet, web - User name / password, RA

Using the switch's command-line interface (CLI) is very similar to entering commands on a UNIX system. Console Connection To access the switch through the console port, perform these steps: 1. At the console prompt, enter the user name and password. (The default user names are “admin” and “guest” with corresponding passwords of “admin” and “guest.”) When the administrator user name and password is entered, the CLI displays the “Console#” prompt and enters privileged access mode (i.e., Privileged

The compact and el- egant design of VM1188T allows users to make VoIP calls at work, home, and on campus with POTS like voice quality The modulation of VM1188T is based on the WiFi standard; it is compatible with almost all standard 802.11b/g access points. With the VM1188T, users can access to both PSTN and SIP networks as long as there is a trunking gateway available at the CO side. With the easy startup, users don’t have to remember the SSID or security key of each AP, the VM1188T stores thes

EH202 . E1298-R0 . 150153-10 . EtherHub-24s Smart Ethernet Hub wit . 24 10BASE-T (RJ-45) ports . 1 10BASE2 (BNC) port . and 1 AUI por . Copyright © 1998 Accton Technology Corporation. All rights reserved . No part of this document . prior written consent of Accton Technology Corporation . Accton makes no warranties with . of merchantability, quality, or fitness for any particular purpose. The information in this documen . is subject to change without notice. Accton . without obligation to notify

This hub is suitable for desktop or rack-mount installation, and supports full-range power input. The EtherHub-16 conforms to the IEEE 802.3 standard for local area networks based on CSMA/CD, and provides10BASE-T, 10BASE2 and 10BASE5 repeater functions including: · Signal amplification and retiming · Preamble regeneration and fragment extension · Automatic port partition and reconnection Hardware Installation The EtherHub-16 has 16 RJ-45 ports, of which Port 16 can serve as either a standard por

• Verify port group is configured in the partner end, and in the same configuration. If the local end is set in manual aggregation or LACP, the same should be done in the partner end; otherwise part aggregation will not work properly. Another thing to note is that if both ends are configured with LACP, then at least one of them should be in ACTIVE mode, 269 otherwise LACP packet wouldn’t be initialed. • LACP cannot be used on port enabled Security and 802.1x, therefore it cannot be enabled if th

:_deR]]ReZ`_>R_fR. Installation Manual 7Rde6eYVc9fS)d. 7Rde6eYVc9fS"#d. Stackable Fast Ethernet Hub with 8/12 10BASE-T/100BASE-TX Ports Fast EtherHub Installation Manual INTRODUCTION General Description The EH3008C and EH3012C 100BASE-TX 8/12 port stackable hubs are entry level 100Mbps Fast Ethernet hubs. They are built around a standard 19-inch chassis which allows stand-alone or rack-mounted operation. These 100BASE-TX 8/12 port stackable hubs are economical Fast Ethernet hubs with 8/12 100BAS