TN PN Requirement Location 25034 or 3525 240 volts, 50 hertz United Kingdom 25034 or 3525 230 volts, 50 hertz Europe 3518 120 volts, 60 hertz USA/Canada/Mexico 3514 100 volts, 50-60 hertz Japan 25034 or 3525 240 volts, 50 hertz Australia Environment Typical Operating Temperature* : 0° to 50° C (32° to 122°F ) Storage Temperature: -20° to 85° C (-4° to 185°F) Humidity 10-90%, non condensing Altitude 0-10,000 feet Warranty Lifetime DECLARATION OF CONFORMITY Name of Mfg: Transition Networks 6475 Ci

Operational rating on pins 3 and 6: 0-30VDC maximum 1A Relay 3 RJ-45 6 Switch-Selectable Configurations T1 COPPER RJ-45 Configured as either "long haul" or “ short haul” on 100 ohm cable, with a variety of selectable distance settings. E1 COPPER RJ-45 Configured as either "long haul" or “ short haul” on 120 ohm cable. STRAIGHT-THROUGH/CROSSOVER RJ-45 Allows straight-through cable to be used where crossover-configuration cable is required. Switch-Selectable Functions LOOPBACK TEST FUNCTION A loop

The CPSFM-200 may be installed in either the AC-powered or the DC-powered, 18-slot or 19-slot, PointSystem™ chassis. The drawing below shows the CPSFM200 installed in the back of a AC-powered PointSystem™ chassis. 0 CPSFM-200 Fan Module AC-Powered PointSystem Chassis NOTE: The CPSFM-200 fan module is required in PointSystem™ applications where the ambient temperatures approach 60°C. Installation . . . . . . . . . . . . . . . .2 Technical Specifications . . . . . .3 Contact Us . . . . . . . . . .

Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität. Compliance Information UL Listed C-UL Listed (Canad

The CGETF10xx-10x is also designed to be installed in the Transition Networks PointSystem™ chassis. Part Number Port One - Copper Port Two - Duplex Fiber-Optic CGETF1013-105 RJ-45 1000Base-T SC, 1000Base-SX, 850 nm multimode 100 m (328 ft)* 300 m (984 ft)* (62.5/125 .m cable) 500 m (1,640 ft)* (50/125 .m cable) CGETF1014-105 RJ-45 1000Base-T SC, 1000Base-LX, 1310 nm single mode 100 m (328 ft)* 10 km (6.2 miles) * CGETF1015-105 RJ-45 1000Base-T SC, 1000Base-LX, 1310 nm single mode 100 m (328 ft)*

Media converter models are selected according to the fiber mode and fiber connector required at the site. Multimode fiber-optic cable can use either an ST connector (E-100BTX-FRL-01) or an SC connector (E-100BTX-FRL-01 (SC)). Singlemode fiber (E-100BTX-FRL-01 (SM)) uses only an SC connector. All media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode. E-100BTX-FRL-01 Provides an RJ-45 unshielded twisted pair '100BASE-TX

Use only correctly (straight through or crossover) for site. Cable Pair #1 Pair #1 connections between an ATM switch and the media converter must dedicated wire pairs (such as Twisted Twisted be configured as straight through. Cable connections between the Pair #2 Pair #2 blue/white & white/blue, media converter and a NIC must be configured as crossover. orange/white & white/orange) for the active pins. Connectors for unlike devices Connectors for like devices 12 78 12 78 Installation Notes • KE