Check wheels are fully engaged by gently trying to pull them out. Hold handle and lift upwards until stroller frame is fully extended and clicks into position. Push front swivel-wheel assembly into front leg. Listen for a positive “click” to ensure the wheel is correctly fitted. When properly fitted, the screw head on the front swivel-wheel assembly should face forward and the wheel’s solid spoke fronts should face outward. Pull down gently on the wheel to ensure it is fully engaged. Repeat proc

With the child seat fully reclined, open the belt shield at the back of the seat shell. Pull the yoke out from behind the seat and unhook one shoulder strap (dia 1d). Pull the cover from the top of the seat so that you can see the slots in the seat shell. Pull the shoulder strap through to the front of the seat. Handy tip – An alternative recline position may make the next step easier. Turn the chest pad tab sideways (dia 1e) and ease it through to the front of the seat . Then thread both straps

Please dispose of your child seat safely. Do not sell or pass it on. After an accident, the child seat and your car seat belts should be replaced. Although they may look undamaged, if you were to have another accident the child seat and your car seat belts may not be able to protect your child as well as they should. No child seat is escape proof Harness systems cannot be designed to be completely “child proof” and yet comply with the legal requirements of European Standard ECE R44. The harness

Roundabout® Canadian User Guide Guide de l’utilisateur CanadienPLEASE READINSTRUCTIONSSTORE UNDER COVERPRIERE DE LIRELES INSTRUCTIONSRANGER SOUSLA HOUSSE Roundabout® Canadian User Guide Guide de l’utilisateur CanadienPLEASE READINSTRUCTIONSSTORE UNDER COVERPRIERE DE LIRELES INSTRUCTIONSRANGER SOUSLA HOUSSE Table of Contents Safety Information Warnings......................................................................................................2 Important Notes............................

This product and its components are subject to change without notice. P279700 R1:08.06 WARRANTY This product is distributed by Britax Child Safety, Inc. (“Britax”). Britax warrants this product to the original retail purchaser as follows: Limited One-Year Warranty This product is warranted against defective materials or workmanship for one year from the date of original purchase. Proof of purchase is required. Your exclusive remedy for this warranty is that Britax will, at its option, provide re

Doing so could cause the child seat not to perform as intended. Forward-Facing Installation Forward-Facing Installation 1 Loosen the harness. a Lift harness adjuster lever b Pull both harness straps forward 2 Remove the body pillow and unbuckle the harness. 3 Pull the head restraint cover up, then pull the seat cover forward to access the forward-facing belt path. 4 Route the vehicle seat belt through the forward-facing belt slots, then buckle. Ensure the vehicle belt is not twisted. 5 Push the

We recommend that you retain your receipt and attach it to this user guide. They should be kept in a safe place. Britax does not accept liability for damage arising from abuse, misuse or negligence. This guarantee is not transferable and therefore does not apply to second-hand products. Your statutory rights are not affected by this guarantee. If in doubt ............................................................ For advice as to the suitability of this restraint for your car please use on our

Certification............................................................................ Registration............................................................................ Weight Range/Maximum Height............................................ Installation: Aircraft............................................................................... Features Front View.............................................................................. Rear View........................................

. . . . . . . WARNINGS . . . . . . . . . . . . Important Notes. . . . . . . . . . . . . . Certification . . . . . . . . . . . . . . . . . Registration . . . . . . . . . . . . . . . . . . . Vehicle Safety Belts . . . . . . . . . . . . . . . . . . . . Vehicle Seating Positions . . . . . . . . . . . . . . . . . . . . . . Features. . . . . . . . . . . . . . . . . . . . . . . . Securing the Child . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . .

33IMPORTANT: • The harness buckle strap should lie toward the back of the child seat during installation. • The buckle should be in the inner slot for rear-facing installation. 34 1 Loosen the harness. a Lift harness adjuster lever b Pull both harness straps forward 2 Remove the body pillow, unbuckle the harness, and remove the belly pad. 3 Pull the head restraint cover up, then pull the seat cover forward while pulling the buckle through to access the rear-facing belt path. IMPORTANT: Ensure bu