30. Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon Locknut (3). 31. Attach the Short Cable (35) to one of the three holes in the Leg Lever (29) with a 5/16” x 3/4” Bolt (89), a 5/16” Washer (8), and a 5/16” Nylon Locknut (3). Note: The three holes are for cable adjustment. Insert the Short Cable between the welded rod and the Leg Lever. Press a 1” Round Inner Cap (49) into each end of the Curl Bar (86). Slid

INSTALL THE LIFELINK UPGRADE KIT TOOLS REQUIRED: Standard Screwdriver, Phillips Screwdriver, Hex Key Wrench Set, Pliers, Wire Cutters, Anti-Static Strap WARNING: FAILURE TO OBSERVE SAFETY PROCEDURES WHEN SERVICING THIS UNIT COULD RESULT IN INJURY FROM ELECTRICAL SHOCK STEP 1 Turn the power off at the ON/OFF switch and unplug the unit at the wall outlet. STEP 2 Ground yourself by positioning an anti-static strap around your wrist and attaching the other end (alligator clip or adhesive end)

AK62-00223-0000 Rocker Cover Kit Mounting Screws (includes clip & screw) (2 per side) GK62-00002-0066 0017-00101-1796 Leg Levelers AK62-00124-0000 Wheel/Bracket Assy. AK62-00102-0000 Mounting Screws Ladder Frame Cover w/decal AK62-00106-0001 Mounting Screws (4) 0017-00101-1795 Right Link Cover w/decal AK62-00367-0000 Left Link Cover w/decal AK62-00368-0000 Mounting Screws (6 per cover) 0017-00101-1796 Mounting screw 0017-00101-1796 Right Inside Rocker Cover 0K62-01037-0000 Right Inside Lever Joi

Please take special note of the following important points prior to choosing a location and beginning assembly of the Total Body Trainer. IMPORTANT SAFETY INSTRUCTIONS! .. DO NOT LOCATE THE CROSS-TRAINER OUTDOORS, NEAR SWIMMING POOLS, OR IN AREAS OF HIGH HUMIDITY. .. DO NOT OPERATE YOUR CROSS-TRAINER IF IT HAS BEEN DROPPED, DAMAGED, OR EVEN PARTIALLY IMMERSED IN WATER. IF THIS OCCURS, CONTACT LIFE FITNESS CUSTOMER SUPPORT SERVICES AT THE NUMBER IN THE OPERATION MANUAL. .. DO NOT LOCATE THE CROSS

Page 3 of 14 Page 4 of 14 CROSS-TRAINER 90X 90X-0XXX-01 Console Support & Deadshaft Covers S/N XTA100000 2-Outside Front Deadshaft Cover 0K62-01013-0000 2-Outside Rear Deadshaft Cover 0K62-01012-0000 Right Inside Deadshaft Cover 0K62-01010-0000 Left Inside Deadshaft Cover 0K62-01011-0000 2-Front Inside Deadshaft Cover 0K62-01009-0000 Console Support AK62-00123-0000 Console Support Cap 0K62-01030-0000 Console Support Shroud 0K62-01023-0000 Right Bullhorn Cover 0K62-01007-0001 Left Bullhorn Cover

Any service, other than cleaning or user maintenance, must be performed by an authorized service representative. There are no user serviceable parts. TABLE OF CONTENTS Section Description Page 1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 1.1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

It offers a simple, non-intimidating console and the most popular workouts. With it's contemporary industrial design and high-performing durability, nothing else compares. This familiar, classic machine is used today by thousands of world-class facilities all over the globe, and with good reason, it delivers. CLASSIC SERIES ELLIPTICAL CROSS-TRAINER The Life Fitness Classic Series Elliptical Cross-Trainer offers a smooth total-body cardiovascular workout. Built for comfort it is a proven machin