Press the measurement switch 2. Press the measurement switch gently. All display segments are displayed for several seconds. 3. Wait until the symbol is displayed. Wait until “0.0 kg /0.0 lb” and the Ready/Complete symbol are displayed. Note: If “0.0 kg /0.0 lb” and the Ready/Complete Step on the scale symbol are displayed about forty-five seconds, the scale will automatically turn off. Ready/Completesymbol 4. Step on the scale gently and stand still during the measurement. You will see the disp

PROG 2 0. 000g 6.3.2. Recalling a Measurement Program with a Program Number Stored measurement programs can be recalled with a program number. PROG "1 0 . 000g 1. Press and hold the PROGRAM key in the gram display. 2. Press the v or ^ key to select a program number PROG "2Program number 3. Press the ENTER key to use the selected number. MS-70 / MX-50 / MF-50 / ML-50 25 end PROG "2 0.000g 7. Measurement Programs 7.1. List of Measurement Programs 7. Measurement Programs 7.1. List of Measurement Pr

.. The humidity is less than 85% (non condensing). .. It is away from water, dust, chemicals, and corrosive or explosive gases. .. It is not exposed to direct sunlight. 2. Place the TM-2655/TM-2655P on a table solid enough to support its weight. 3. Adjust the height of the chair and table so that the arm insertion section is at the user’s heart level. Fig.4 Proper installation 4. Use the power cable provided with the device to connect between the AC INPUT connector and an electrical outlet. Usin

When the halogen lamp has cooled down, the next measurement can be started. If necessary, change the drying time and temperature. When a measurement is started and the time passes one hour, the maximum temperature is automatically regulated to 160°C for safety. Operation to Stop Measurement During measurement, the STOP key is always effective. If there is an error or danger, press the STOP key. 2.3. After Use and Maintaining the Analyzer Put dust cover on the analyzer after it is cool. Clean the

Display gram unit (of the weighing mode). PROG 1 0. 000g Select a Program Number to Edit the Measurement Program 2. Press the PROGRAM key and press the v or ^ key to select a program number. 3. Press the ENTER key to use the number. 4. The analyzer displays end and returns to the weighing mode. PROG "4Program number Caution If the data memory function is active, the data end memory number (MEM) is displayed in place of the PROG 4 0. 000g program number (PROG). MS-70 / MX-50 / MF-50 / ML-50 35 Se

Keys to Successful Monitoring: Blood pressure fluctuates throughout the day. We recommend that you are consistent in your daily measurement routine: • Measure at the same time every day. • Sit in the same chair/position. • Relax for 5 minutes before measurement. • Sit still during measurement – no talking, eating or sudden movements. • Record your measurement in a logbook. How Do I Record My Blood Pressure? Blood pressure readings are typically recorded with the systolic pressure written first,

Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. A&D Weighing reserves the right to change specifications at any time. CAUTION TABLE OF CONTENTS Introduction......................................................................... 1 Installation .......................................................................... 1 Installing the Paper ................................................ 1 To Remove the Paper Roll ..........................

WM+PD4001183 33 Contents Dear Customers....................................................................2 Preliminary Remarks.............................................................2 Precautions...........................................................................2 Parts Identification................................................................3 Symbols................................................................................4 Operation Mode................................

No part of this publication may be reproduced, transmitted, transcribed, or translated into any language in any form by any means without the written permission of A&D Company Ltd. The contents of this manual and the specifications of the instrument covered by this manual are subject to change for improvement without notice. i WARNING DEFINITIONS The warnings described in this manual have the following meanings: WARNING Important information to alert you to a situation that might cause injury an

Designed for ease of use and accuracy, this monitor will facilitate your daily blood pressure regimen. We recommend that you read through this manual carefully before using the device for the first time. Preliminary Remarks □ This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the CE mark of conformity accompanied by the reference number of the designated authority. □ The device is designed for use on adults only, not newborns or infants. □