All electrical connections must performed by qualified personal. Be sure the available voltage matches the voltage requirements of the unit. Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating. Always disconnect from main power before performing any type of service or any cleaning procedure. Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of the cord. Please be

This unit is rated IP 20, ideal for indoor applications and control data input is via 3 and 5 pin DMX data first in and out connections. The ELED Fresnel features 10° to 50° manual zoom, internal DMX control for dimmer / strobe and is operable via 1 or 2 channel DMX modes. The maximum output intensity of channel 1 can be preset by adjusting onboard menus 5 and 6. Gel frame and barn door kit are included and rigging for this unit includes single yoke bracket, safety and data cable are optional.

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 109134224290183282347150180 109134224290183282347150180 8.81” / 224mm 7.2” / 183mm 4.3” / 109mm 5.3” / 134mm 11.4” / 290mm 11.1” / 282mm Design LED 36MH Dimensions The Design LED 36MH (DLED 36MH) by Elation Professional is a high output intelligent LED moving head fixture equipped with 36 x 1-watt LEDs (12 red, 12 green and 12 blue) featuring high quality Luxeon 1 LEDs manufactured by Lumileds, USA. This unit features step-less smooth

2001 Antari Lighting and Effects Ltd. User Manual Antari Snow Machine Congratulations on the purchase of your new ANTARI Snow MACHINE. Introduction Thank you for choosing an ANTARI Snow Machine. You now own a rugged and powerful state- of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Snow Machine for years to come. P

Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage. Fuse Replacement: Disconnect the unit’s main power. Insert a standard flat head screw driver in to the fuse holder housing. Turn the screwdriver in counterclockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder back into it’s housing and turn in clockwise direct

27 Design Spot 575B™ Design Spot 575B™ the fixture will lock into the last DMX signal it received and remain in that position until it is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound-active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto Program” – Fixture will go into stand-alone mode, running the built-in program. “Mus

This unit is rated at IP65, ideal for indoor or outdoor applications and includes outdoor rated power and data cables along with a/c power 120v input PPG cable (a 240V model is available). The ELAR EXPAR is power/data linkable and is equipped with an internal power supply. The unit is safe in any working position and can be operated in two user modes: DMX-512 or stand alone. There are two DMX modes, a 3 channel mode and a 5 channel mode. Optional accessories for the ELAR EXPAR include ELAR WR wi

number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our customer support number. All packages returned to the service department not displaying a R.A. number on the outside of the package will be returned to the shipper. ©Elation Lighting® - - ELED TRI PAR56 Instruction Manual Page 3 ©Elation Lighting®

Improper optimization may add a yellow tint to the lamp output and reduce intensity. The minimum deviation amount is 1.0mm. Running the fixture within a lower deviation can cause damage to the lamp and/or lens. The Design Beam 300™ lamp holder is aligned at the factory. However, due to slight imperfections in all lamps, fine adjustments will improve light performance. Please follow the procedure below for proper lamp optimization: 1. Using a DMX controller or the control panel on the unit, strik

Please note that the outside temperature should not exceed 45° C. 8.4 Personality: 8.4.1 Status setting Address via DMX -This function allows the DMX address to remotely be adjusted from a DMX console. This setting requires special settings for both the controller and ©Elation Professional, Los Angeles Ca. 27 Design Spot 300 Pro™ the fixture. RDMX is on by default. For operational instructions please see Section 9/Page 33 of this manual “Remote DMX addressing.” No DMX Status – This function dict