To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connec tions. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dang

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cab

Este sistema incluye las más nuevas características y está amparado por una garantía limitada de un año. Antes de usarlo le sugerimos que lea detenidamente todas las instrucciones. Este libreto incluye instrucciones para los sistemas VHF-1001 y el VHF-2001. Advertencias 1 .Todas las instrucciones de uso deben ser leídas antes de utilizar este equipo. 2. Para reducir el riesgo de descarga eléctrica, no abra la unidad. No hay ACCESORIOS O PIEZAS REEMPLAZABLES EN SU INTERIOR. Por favor, referen

There is also individual level control for each channel. Two different models are available and both operate on a VHF high band frequency between 177.60 MHZ to 204.60MHZ THE MODELS AVAILABLE ARE: VHF-2001 M - Which comes equipped with (2) hand held microphone transmitters. VHF-2001 HL -Which comes equipped with (2) belt pack transmitters and (2) Headset/ lavalier combos. VHF- 2001 DUAL CHANNEL RECEIVER OPERATION Note: Effective range between the transmitter and receiver is up to 100 feet.

Licensing of Gemini equipment is the user’s responsibility and licensability depends on the user’s classification and application. Note This equipment has been tested and found to comply with the limits set forth under part 15 and 74 of FCC rules. This equipment operates at a frequency that has been authorized by the FCC. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, try

GCI-Technologies shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of GCI-Technologies. It is recommended that all maintenance and service on the product s

6) to a position which corresponds to the adjust tracking force. If the cartridge tracking force is grams, the anti-skate control also be set to Ajuste del anti-skating (anti-patinaje) Coloque el control anti-skate (Fig. 6) a la posición que corresponde al afuste de la 2 fuerza de seguimiento. Si la fuerza de se-2. guimiento del cartucho es de 2 gramos. El control anti-akate también debe colocarse 'en 2. Anti-skating réglage Mettez anti-skate contrôle (fig. 6) à la position qui correspond à

This state of the art 2U professional CD player is backed by a 1 year warranty*. Prior to use, we suggest that you carefully read all the instructions. FEATURES: -Audio CD, CD-R CD-RW compatible -Anti-shock using RAM buffer memory -2 Selectable Jog modes Pitch Bend/Search -Instant-start & cue with preview -Single auto-cue/continuous play modes -Seamless loop with reloop -Pitch bend via jog wheel or buttons -Three mode time selection -Frame accurate search -Large blue backlit LCD display -Coaxial

Releasing the CUE (11) button will return the CD laser to the preset cue point in PAUSE mode. BPM: Tapping the BPM (23) button allows you to count the beats per minute on a track. Holding the BPM (23) switches display modes from BPM to PITCH, which is indicated on the right side of the LCD (12). TRACK SKIP: The TRACK SKIP (14) buttons let you select the track to play. +10: The +10 (15) button lets you quickly scan through track numbers in increments of ten. SEARCH JOG WHEEL: Use the SEARCH JOG W