5 Performance Data, Low Temperature (R-404A/R-507) .............................................. 6 Electrical Data ..........................................................................................................7-9 Physical Data ....................................................................................................... 10-11 Nomenclature S R N 0500 H 2 C Application H = High Temp. M = Med. Temp. L = Low Temp. E = Extra Low Temp. Model Size Semi-Hermetic Reciprocating Remot

Use of vibration pads or isolators is recommended. The roof must be strong enough to support the weight of the unit. Figure 1: Suggested Rigging © 2007 Heatcraft Refrigeration Products LLC Remote Air-Cooled Condenser Remote Air-Cooled Condenser Installation and Operations Manual, August 2007 The condenser should be located no closer than four feet from any wall or other obstruction to provide sufficient clearance for air entrance. Do not attach ductwork to the coil inlet or fan outlet. Care shou

H-IM-PCS October 2004 Part Number 25000102 Installation and Operation Manual (Replaces H-IM-72B, October 2004) Parallel Compressor Systems Installation and Operations Manual Installation and Operations Manual Table of Contents Introduction.............................................................................................................. 3 Inspection Unit Designation Model Definition System Warranty........................................................................................

25006801 l Table of Contents Nomenclature ........................................................ 2 Field Wiring.......................................................... 12 General Safety Information...................................2 Refrigeration Charging........................................13 Compressor Module Specifications....................3-4 Operational Checkout.........................................14 Dimensional Diagrams...........................................5 System Balan

25000102 Compressor CompressorCompressorCompressorCompressorCompressor Systems SystemsSystemsSystemsSystemsSystems Installation InstallationInstallationInstallationInstallationInstallation HEATCRAFT INC. REFRIGERATION PRODUCTS DIVISION 2175 WEST PARK PLACE BLVD., STONE MOUNTAIN, GA 30087 • 770-465-5600 • FAX 770-465-6016 WWW.HEATCRAFTRPD.COM • E-MAIL: HRPD.FEEDBACK@HEATCRAFT.COM Installation, Operation and Maintenance Guide Parallel Compressor Systems Replaces H-IM-72A Table of Contents Introduc

6 Condensing Unit Rigging Figure 3. Condensing Unit Rigging Adequate rigging measures must be taken to support unit weight and to protect the unit from damage during unloading and placement process. Rigging holes have been provided in legs and under the unit compressor compartment frame to assist. Rigging Holes Spreader bars may be used to protect unit from damage. 7 Refrigeration Piping And Line Sizing Refrigeration Piping And Line Sizing The system as supplied by Heatcraft Refrigeration Produc

4 Direct Expansion Coils ......................................................................... 3 Filter Quantities.................................................................................... 8 Freezing Temperatures ........................................................................ 6 Inspection ............................................................................................ 2 Installation ...............................................................................