= If chemical products or mixtures of product come into contact with the eyes or are swallowed consult a doctor immediately, taking the label of the product with you. = Wash all clothes that come into contact with the chemical, whether diluted or undiluted, thoroughly before using them again. = Don’t smoke, drink or eat when preparing or spraying the mix or near or in the fields treated. = DON’T ENTER THE TANK: the residues of a chemical product can cause poisoning and suffocation. = When sprayi

Never lift or move the mistblowers by hand if there is liquid in the tank. The machine will weigh more and the movement of the liquid can change the centre of gravity causing uncontrolled movements. We recommend using slings as shown in the figure, the lifting points to use on the machine are indicated with the relevant symbol. Movimentare e sollevare la macchina Don’t lift the machine with the forks of a forklift truck because the machine can solo con cisterna vuota tip over due to the overhang

4 1.2 GUARANTEE ....................................................................................................................... 4 1.3 PRODUCT RESPONSIBILITY .............................................................................................. 4 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE ............................................. 4 2 SAFETY REGULATIONS AND RESIDUAL RISKS .............................................. 5 2.1 INTENDED USE .................................

6.2.2 LOW VOLUME CONICAL NOZZLES (150-500L/HA) Made of two ceramic pieces with colour-coded plastic inserts, they are available in various sizes identified by the colour (see table 3 page 32). They have been specifically designed to obtain a large number of small drops with strong turbulence even at low pressures (2-3 bar). This turbulence makes them suitable for penetrating luxuriant vegetation and so they are suitable for fungicides and insecticides. The nozzles of the TR Lechler and TXA Teeje

8.2.3 MULTIPLIER LUBRICATION The multiplier and disengaging boxes are normally lubricated in an “oil bath”, in special cases NLGI n.0 grease is used. The viscosity is an essential characteristic of a lubricant oil and this is indicated by the SAE (SOCIETY OF AUTO-MOTIVE ENGINEERS) classification of the oils for gearboxes and differentials. Special additives improve the capacity of the oil to maintain a lubricant film also at high pressures and temperatures. We recommended using SAE 90 oil for th

= connect hose T to deviator D using the union hose adaptor supplied. = turn the lever of deviator D to the filling position. = place the other end of the hose, on which you fitted filter G, in the watering point. = start the power-takeoff leaving pressure regulator C in the draining position (you don’t have to put the pump under pressure). = the filling speed in litres/minute is equal to the delivery of pump P. = visually check the level of the liquid in the tank and after filling stop the pump

Nevertheless, we list summarily a number of instructions to observe: Petrol mixture motors (two stroke): respect the percentage of oil present in the petrol and avoid the motor losing revs if the liquid contained in the cistern unexpectedly finishes. Petrol and diesel motors with electric starters: check the level of efficiency of the battery and carry out normal maintenance. Before starting check that the command lever of the pressure adjustor (lever A page 10) is in the discharge position; sta

5.7.2 HYDRAULIC DRIVEN HEADS On request hydraulic pivoting (inclination 90° roughly) and rotating (max rotation 270°) heads are available. 5.7.3 HYDRAULIC DRIVES The cannon fans can be equipped with hydraulic drives: with the cylinder fitted directly (30° inclination roughly) or a motor with a pinion and chain (180° inclination roughly). 5.7.4 OIL FEED FROMTRACTOR (for hydraulic systems) Connect the delivery and discharge quick-fit coupling to the respective connections, respecting the direction

It is used as follows: - turn pressure on in TOP-MIX premixer (see paragraph above) -turn lever 6 down and suck the product up. -the product is suctioned, mixed with water under pressure, and directly incorporated in the tank of the machine. -after incorporating the product in the tank, lift lever 6 back to a horizontal position. NOTE:To wash the incorporator, put it in the premixer for a few seconds, performing the hopper washing operations described in paragraph 4.4. 18 unigreen 4.13 WASHING T

sing. 0,51 0,60 0,72 0,78 0,88 0,96 1,01 0,76 0,90 1,07 1,18 1,31 1,44 1,52 Litri/ha Litri/ha Litri/haVelocita Km/hVelocita Km/hspeed Velocita Km/hspeed speed Larghezza di lavoro working width 4 m. 5 m. 6 m. Tab. 3215/0000F unigreen 29 TABLES FOR CALIBRATING ATOMISERS TABLES FOR CALIBRATING ATOMISERS O650 TGZ unigreen spa PRESSIONE bar 3,5 4 5 6 7 3,5 4 5 6 7 3,5 4 5 6 7 Litri/min. ug. sing. Velocita Km/hspeedVelocita Km/hspeed Velocita Km/hspeed Tabella erogazione in Litri/ettaro Gr.Ventola O65