A single external resistor adjustment can be used to change both outputs between the limits of ±50 mV and ±42V. These devices are designed for local “on-card” regulation, eliminating distribution problems associated with single- point regulation. To simplify application the regulators require a minimum number of external parts. The device is available in three package types to accommodate various power requirements. The K (TO-66) power package can dissipate up to 3W at TA = +25°C. The D 14-pin d

• 1500 W Peak Pulse Power capability on 10/1000 .s waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for SMC/DO-214AB COLOR BAND DENOTES CATHODE unidirectional and 5.0 ns for ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. bidirectional. • Typical IR less than 1.0 .A above 10V. • UL certified, UL #E210467. DEVICES FOR BIPOLAR APPLICATIONS -Bidirectional types use CA suffix. -E

C Transient Voltage Supressors (continued) Typical Characteristics Peak Pulse Power Rating Curve Pulse Derating Curve 100 75 50 25 0 PEAK PULSE CURRENT ( %) PULSE POWER ( kW) T = 25.C A 10 CAPACITANCE ( pF) PULSE POWER ( % ) 0.1 0 25 50 75 100 125 150 175 200 0.0001 0.001 0.01 0.1 1 10 . AMBIENT TEMPERATURE ( C) PULSE WIDTH (ms) Pulse Waveform Junction Capacitance 150 20000 T = 25.C T = 25.C A A Pulse Width (td) is Defined 10000 f = 1.0 MHz tf = 10µ ....sec Visg = 50m Vp-p as the Point Where the

20 deg maximum 0.5mm maximum B0 Typical component cavity center line 0.5mm maximum 20 deg maximum component rotation Sketch A (Side or Front Sectional View) Component Rotation A0 Typical component center line Sketch C (Top View) Component lateral movement DO-214AB(SMC) Reel Configuration: Sketch B (Top View) Component Rotation Figure 4.0 W1 Measured at Hub Dim A max Dim N Dim D min Dim C B Min See detail AA DETAIL AA 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millime