1. At the identified mounting location, lay the transducer body face down with the pointed end towards the bow. 2. Fill the hull with enough water to submerge the transducer body. Use a sand filled bag or other heavy object to hold the transducer in position. The transducer cannot transmit through air. The water purges any air from between the transducer and the hull and fills any voids in the coarse fiberglass surface. INSTALLATION INSIDE THE HULL INSTALLATION 3. Power up the Control Head. 4. R

The Fishin’ Buddy® can normally detect spawning fish that build beds near the shoreline. Direct experience with each shoreline will teach you the Fishin’ Buddy's capabilities. The best way to understand how your Fishin’ Buddy® "sees" is to imagine that the transducer is a flashlight and the water is clear. If you are trying to "see" into weeds, the ability of your flashlight beam to penetrate depends on the thickness of the weeds. If the weeds are thin, your flashlight beam will penetrate furthe

QuadraBeam PLUS™ starts with two fan-shaped 35° 455 kHz Side Structure locating sonar beams to spot fish, bait and structure to the left and right of the boat over an area of the bottom that’s always equal to twice your depth. For a detailed view below the boat, QuadraBeam PLUS™ uses DualBeam PLUS™ technology, with precision 20° and wide 60° beams. QuadraBeam PLUS™ finds more fish faster, and can even tell you where to put your bait by showing if fish are to the left, right or directly beneath y

A message will appear telling you how many seconds there are until shutdown occurs. Your 1100 Series™ should always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs properly and any menu settings will be saved. VIEW Key The VIEW key is used to cycle through all available views. Press the VIEW key to advance to the next view. Repeatedly pressing VIEW cycles through all views available. Views can be hidden to optimize the system to your fishing requirements (see View

If you wish assistance from the factory, contact us: • Click through our website at • Call us toll free in the United States 800.722.0500/ direct 818.407.2428 • Write us: Attention: Customer Service Califone International Inc. 1145 Arroyo Ave. Suite #A, San Fernando, CA 91340 Be sure to have the model and serial number available. Please DO NOT SHIP ANY UNIT TO THE FACTORY WITHOUT PRIOR AUTHORIZATION AND INSTRUCTIONS FROM CALIFONE. SPECIFICATIONS Number of Listening Positions 6 Number of Micropho

5. While holding the control head in place, slide the bolt provided through the mounting bracket assembly, and screw the mounting knob onto the other side, in order to hold the control head in place. Hand tighten only! 6. You can tilt the control head by loosening the mounting knob and tilting the control head forward or backward to suit your needs. You can also swivel the control head on the mounting bracket by grasping the control head and rotating it. Positioning the Control Head Control Head

PRICE HUM 4069601 $1939.60 Specifications: Display: 480V x800H, 8" Diagonal, 65,000 Color TFT Transducer Standard: Side Imaging/DualBeam PLUS Depth Capability: Side Imaging:150 ft Down; 240 ft each side; DualBeamPlus: 1500 ft w/ Standard Transducer;Target Separation: 2-1/2 inches Temperature: Included in Transducer Speed: GPS Speed Included Unit Mounting: Gimbal or In-Dash Unit SizeInstalled (Gimbal): 11-1/4" Wx6-3/4" Hx4-1/4"D Unit SizeInstalled (In-dash) 10-3/4" Wx6"Hx1-3/8" D; Required Minimu

(Feet/F, Meters/C, Fathoms/C, Default = Meters/C, where F stands for Fahrenheit and C stands for Celsius) Scroll through all SetUp menu choices to exit the SetUp menu. SideFinder™ (Setting Saved in Memory, Downlooking and SideFinding™ Sonar Units only) Press the POWER-MENU key until SIDEFINDER appears. Select either OFF or ON to display the SideFinder™ window on the screen (Off, On, Default = Off) SideFinder™ Range (Setting Saved in Memory, Downlooking and SideFinding™ Sonar Units only) Press th

320 V x 240 H Transducer...................................................................................................... XHS-9-20-T Transducer Cable Length ............................................................................ 20 ft (6 m) Current Draw .............................................................................................. 0.383 Amps NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth performance may vary due to transducer i

Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy-free of charge during the first year after purchase,and available at a reasonable rate after the one-year period. For complete details, see the Warranty section of this manual. We encoura