A popup menu will appear with time selections, move the ShuttlePoint knob to the desired selection and press “ENTER”. 3.11.1 Selecting a track line color The chart plotter has 8 different line colors that you can choose for the track plotter. To select from press “MENU”, select TRACK, press “ENTER”, use the ShuttlePoint knob to select LINE COLOR, press “ENTER” and choose the color using the ShuttlePoint knob. 3.11.2 Turning on or off the Track plotter Press “MENU”, select TRACK and press “ENTER”

If you have a fast moving boat you may want to setup the GPS chart plotter to record a Track point every 0.5NM or if you have a sail boat you may want to setup to lay down a Track point once ever 1 minute. NOTE Please note the Track point memory is 3000 points. This means for a long journey you may have to adjust the time or distance to be able to track your journey. It should be noted when the 3000 Trackpoints are used up, the first Track point layed down will be deleted when a new point is pla

FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions may cause harmful interference with radio communications. There is no guarantee that interference will not occur in a particular instance. If this equipment does cause harmful interference to other equipment, try to correct the problem by relocating the equ

2. Next move the ShuttlePoint knob until the cursor is over the Mark that you want to be the next leg in the Route. 3. Press [ROUTE]. You will notice a bearing line joins the first and second Mark which means these Marks are selected into the Route. 4. Repeat steps 3 and 4 until all Marks are entered into the Route. NOTE At this point the Route is saved as ROUTE01. If you would like to save the Route under a specificname follow the steps on the previous 9.1 paragraph. Page 52 CP500 9.4 INSERTING

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. NOTICE Unauthorized changes or modifications to this equipment may void compliance with FCC Rules. Any change or modifica

Remove a C-MAP NT+/MAX C-CARD if present and insert the optional User C-CARD into the slot. 2. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT] or move the ShuttlePoint knob to the right. 4. A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and press [ENT]. 5. A popup SAVE FILE window will app

2 Operation ........................................................................................................................ 3 Alarms ........................................................................................................................ 3 Alarms On/Off .............................................................................................................3 Shallow Alarm ................................................................................................

FF520 Page 23 7. Move the ShuttlePoint knob to highlight YES and press [ENTER] to confirm. 8. Press [CLEAR] to exit. WARNING Turn Off and after few seconds turn On the Fish Finder in case of failed firmware upload. 3.4 SYSTEM INFORMATION PAGE FOR CP180/CP180i/CPV350 For troubleshooting you maybe asked by a Standard Horizon Product Support Technician for the software version of Fish Finder. The following procedure is how to access this information. 1. From the Chart Page, press [MENU] for two tim

11.6 CALL WAITING DIRECTORY The GX5500S logs received distress calls and individual calls. The DSC Call Waiting feature is similar to an answer machine where calls are recorded for review. When a call is logged while the radio is set on the DSC Standby function, a “ ” icon will appear on the LCD. The GX5500S can memorize up to the latest 30 Distress, and up to the latest 80 Individual Calls. 11.6.1 Enabling the Call Waiting Feature Follow the steps below to enable or disable the Call Waiting fea

The transceiver changes to the weather channel mode. 2. Press the or key to change to other weather channels. 3. To exit from the weather channels, press the WX key. The transceiver recalls the previous non-weather channel. page 10 Owner’s Manual HX350S 4.7 SCAN 1. Select the desired channel to be scanned using the or key. 2. Press the MEM key to store the channel into the transceiver's memory. “MEM” is displayed on the LCD. 3. Repeat steps 1 and 2 for all the channels to be scanned. 4. To delet