Some otherprocedures require special attention. The WARNING! symbol means that ifyou are not careful, You could injure or kill yourself, or You could damageequipment or property. The ATTENTION! symbol means you should pay special attention to: Important instructions for using the system, or Important instructions for maintaining the system. The Class II Symbol alerts qualified service personnel to use only identical replacement parts in this apparatus. FOR YOUR SAFETY Do not try to open thecase

If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. The WARNING! symbol means that if you are not careful, You could injure or kill yourself, or You could damage equipment or property. The ATTENTION! symbol means you should pay special attention to: Important instructions for using the system, or Important instructions for maintaining the system. The Class II Symbol alerts qualified ser

Note: You can program this button to control the volume on a TV or amplifier. See Using TV or Amplifier Volume Control later in this chapter for instructions. Guide Button Press the GUIDE button to open the Program Guide. When the Program Guide is open, press this button to switch among Favorites Lists. Arrow Buttons When using a menu, press these buttons to move the highlight to an option. • When watching a program, press the RIGHT ARROW button to open the Browse Banner or the UP or DOWN ARROW

IF YOU ARE AN EXISTING DISH NETWORK CUSTOMER, YOUR CONTINUED RECEIPT OF DISH NETWORK SERVICES FOLLOWING RECEIPT OR PUBLICATION BY DISH NETWORK ON ITS WEB SITE OF THIS AGREEMENT SHALL CONSTITUTE YOUR ACCEPTANCE OF ITS TERMS AND CONDITIONS, AND, ACCORDINGLY, THEY WILL BE LEGALLY BINDING ON YOU. Thank you for choosing DISH Network for your television service provider. DISH Network is happy to answer any questions you may have and to provide you with technical and other customer support through the

9 Getting More Help Troubleshooting -Press the SEARCH button (SAT lights up). -Press the VOL+ button (SAT lights up) -Press the STOP button (SAT lights up, then un-link tone is heard). -Go back to Step 6 and repeat to re-link your remote control. Forgot password for Parental Controls 1. If you have forgotten your existing password, you must call 1-800-3333474 (DISH) with your Receiver CA ID number to get more assistance. Locate the Receiver ID number by selecting SYSTEM INFO on the front panel,

If the brand isn’t listed, see Scan for Device Codes on page 87. 3. Press and hold the device mode button until all the other mode buttons light up, and then release the button. The mode button flashes. For example, hold the TV mode button for a TV until all of the other mode buttons light. When you release the button, the TV mode light will flash. If you are repeating this procedure to program a combination device, be sure to press the correct mode button (for example, if you have a TV/VCR comb

Use the UP/DOWN ARROW buttons to change the channel up or down one channel at a time OR 2. Use the Number buttons to enter a channel number o o o O Q O O O O O OR 3. Use the GUIDE button to display the Program Guide The Program Guide shows you current and future program listings. 3:30 pm 4:00 pm 4:30 pm King TUt Wedding Stay I Life of Grima Surprise by Deal^i ^ Banana Pyramid Fwnlty Feud Then... Use the ARROW or PAGE UP/DOWN buttons to highlight a program and then press the SELECT but

Any changes must be made in the video.reg registry file. Note: Expect TVs to crop the desktop as TVs normally crop their output. Monitors that are normally attached to PCs are not likely to crop the desktop. Monitors accepting TV input may crop the desktop. For that reason, avoid placing user interface elements near the edge of the display. Note: Some monitors that accept DVI input expect 1280x768 or 1024x768 and may not work with 1280x720 (which is the resolution for 720p). 2.4 VBI Support The

Intel® Digital Set Top Box Display Driver User’s Guide for Microsoft* Windows* CE 5.0 4.1.7 Direct3D Mobile Options Direct 3D Mobile is supported on the 830 and 854. [HKEY_LOCAL_MACHINE\System\D3DM\Drivers] RemoteHook This is set to “ddi_iceg” to inform GWES which driver to request Direct3D Mobile support from. Leaving this blank will disable Direct3D Mobile in the operating system. [HKEY_LOCAL_MACHINE\Drivers\Display\Intel] Enable3D This setting enables or disables 3D support i

15 Chapter 2Chapter 2 Remote Control Types of Remote Controls Remote Control 1 uses infrared (IR) signals to: • Control TV1 menus for the nearby TV in Dual Mode. • Control the satellite receiver in Single Mode. IR signals travel only short distances (60 feet or less), and cannot go through walls or other solid objects. You must point the remote control directly at the receiver, with no objects blocking the line of sight. Remote Control 1 uses IR signals to control the receiver and other devices