Set to 15 Watts for maximum volume and more headroom before the sound “breaks up” as a result of overdriving the tubes. Set to 4 Watts to achieve this distorted sound at lower volumes. 6. POWER: This dual-function component is both an ON/OFF power switch and a status indicator light. When illuminated, it shows that your amplifier is ready to be played. To turn your amplifier on, press switch upward. To turn amp off, press switch downward. Note: After the power switch is turned on, the tubes must

We wish you many years of enjoyment with your Kustom amplifier. kustom.com FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re

This model was built from the ground up to offer great tones and reliable performance. Inside this manual, you'll find valuable information about the cabinet's features as well as technical specifications. Become familiar with this information to get the best performance from your cabinet. We wish you many years of enjoyment with your Kustom G-115H. Product Contents These items are included with your G115H speaker cabinet. Be sure to contact your dealer if any items are missing. G115H Speaker Ca

2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfe

The gain is applied before the tone controls. 13.) Bright - this enhances upper Treble frequencies and helps provide clarity to darker sounding guitars. 14.) Rhythm Volume - this is a volume control for the Rhythm Channel only. 15.) Rhythm Bass - this passive EQ adjusts the low frequency equalization of the amplifier. For tighter low-end response, set the Bass control to lower settings. This is particularly helpful when using the amp at very loud volume levels. 16.) Overdrive - this increase

This model was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications. Being familiar with its features will help you effectively dial in different tones. We wish you many years of enjoyment with your Kustom amplifier. kustom.com FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

The amplifier’s internal speaker is disconnected when this jack is used. 15. Power Switch: This dual-function component is both an On/Off power switch and a status indicator light. When illuminated, it shows that your amplifier is ready to be played. To turn amplifier on, press switch upward. To turn amp off, press switch downward. kustom.com KG100FX112 Back Panel External Speaker: This is a two-conductor, .-inch external speaker jack. (Note: This jack is wired in series with the amp’s internal

Use in its lower ranges to produce less distorted tones. As you increase the amount of gain, the tonality will shift from a classic rock-type sound to a heavier, modern tone. 4. Volume (Lead): This controls the overall volume level of the Lead channel only. 5. Channel: This switch selects between the Lead and Rhythm channels. 6. Volume (Rhythm): This controls the overall volume level of the Rhythm channel only. 7. Bass: This controls the bass frequencies for both channels. For a “tighter” bass r

10. Delay/Reverb: This switch selects between Delay or Reverb effects. Press switch in to choose Delay. 11. Effects: This control increases the effect signal level and mixes it with the instrument’s signal. Turn this control clockwise to add the desired level of effects. 12. Chorus: By pressing in, this switch activates a lush Chorus effect. (Note: When Chorus is activated, it is always mixed with either Delay or Reverb, as selected by the Delay/Reverb switch.) 13. Aux In: This is a 3-conductor,

Your KG Model draws on decades of amp design and manufacturing experience at Kustom. This model was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications. Being familiar with its features will help you effectively dial in different tones. We wish you many years of enjoyment with your Kustom amplifier. kustom.com FCC Statements 1. Caution: Changes or modificatio