First, extremely tough black covering is provided along with heavy-duty corners. Second, a serious handle is available at the top of the unit. Third, a heavy-duty metal grille is provided to protect the speaker. This amp is for real. Check it out---it’s all there...sound, portability, roadworthy design. Also, with every KB series amplifier, you get Peavey’s excellent five-year warranty (check the warranty document at the end of the manual for full details), and the best in customer service from

Sometimes digital processors can make an analog signal sound somewhat bright and/or harsh. We have included this control to suppress that effect and mellow the signal. This is especially noticeable on delays and reverbs since they have a decaying tail. Sing into your mic using words containing “s” and “t” while adjusting the DSP Edge control to hear and tweak this function. Make sure you have selected a preset that contains reverb and/or delay and the unit is not in Bypass mode. Otherwise, you w

(23.04 kg) Shipping Weight: 58.5 lbs. (26.54kg) DESCRIPTION The 115 DLMM is a full-range, low-profile stage monitor designed to ensure the performer the most accurate representation of sound. This monitor is at the leading edge of technology, with the high frequencies supplied by a 22XT\ a titanium-diaphragm compression driver. The internal, full-range crossover, with full-range attenuator, blends the 15-inch woofer with the 22XT'“ for the optimum monitor response. The enclosure can be vert

The enclosure is capable of handling up to 700 watts program, and can be used as a stand-alone combo amp or in conjunction with a another enclosure such as the 210 TX,M or 410 TX™. ©1997 ONE YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, MS 39302-2898. Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Stre

Turn the Vintage and Gain controls all the way down before using headphones. Slowly turn up the volume and find a comfortable listening level. Remember, starting out on the bass with hearing damage would not be much fun! When headphones are connected to the MAX 126‚ the speaker is automatically turned off. (9) Power LED This LED illuminates when power is supplied to the MAX126. (10) Power Switch This two-way rocker switch applies power to the unit when placed in the ON position. POWER AMPLIFIER

It produces 12 watts into 4 and 8 ohm direct connections plus a broad range of line amplification. Level controls are provided for mic/page and AUX. The mic/page input is accessable via screw terminals and AUX In may be accessed via screw terminals or RCA jacks. Bass and treble controls are functional on the total system (mic/page/AUX). When a signal is present at the mic/page input the AUX input is muted. This feature is internally defeatable when required. Twenty-five and seventy volt line ou

All strings must be stretched upon installation. After your first tuning, carefully pull each string away from the fretboard, stretching it gently (too much force will break thinner strings). Then, retune your guitar. Peavey recommends that you replace strings in the same gauges to maintain proper neck and/or tremolo tension. If you wish to change strings with different gauges, Peavey recommends that you enlist the services of a qualified technician to make the required truss rod and/or tremol

THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY COMPLETED AND MAILED TO AND RECEIVED BY PEAVEY WITHIN FOURTEEN (14) DAYS FROM THE DATE OF YOUR PURCHASE. In order to obtain service under these warranties, you must: a. Bring the defective item to any PEAVEY AUTHORIZED DEALER or AUTHORIZED PEAVEY SERVICE CENTER and present therewith the ORIGINAL PROOF OF PURCHASE supplied to you by the AUTHORIZED PEAVEY DEALER in connection with your purchase from him of this product If the DEALER or SERVICE CE

THE ENCLOSURE WHEN THE POWER SWITCH IS IN THE OFF POSITION. Tremolo Speed (3) The speed control determines the rate at which the signal is modulated. This control varies the speed of the Tremolo master oscillator and should provide any speed desired for modern music. Clockwise rotation of the speed control increases the speed of the modulation of the tremolo. The Tremolo feature is defeatable from a remote footswitch. Tremolo Intensity (4) The intensity control is used to vary the amount of ampl

The enclosure is capable of handling up to 350 watts program, and can be used as a stand-alone combo amp or in conjunction with a low frequency enclosure such as the 115 BX '. ©1997 ONE YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, MS 39302-2898. Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Street /