CPrc 71 Dubstep2* 4/4 2 96 : CPrc 72 Dubstep3* 4/4 2 96 : Category Arp No. Arp Name Time Signature Length Original Tempo Voice Type CPrc 73 M-Tranc1* 4/4 2 140 : CPrc 74 M-Tranc2* 4/4 2 140 : CPrc 75 M-Tranc3* 4/4 2 140 : CPrc 76 M-Tranc4* 4/4 2 140 : CPrc 77 R&BDsc 4/4 2 110 : CPrc 78 Trance 4/4 4 140 : CPrc 79 Ethnic1 6/4 5 118 : CPrc 80 Ethnic2 7/4 3 120 : CPrc 81 MOD 4/4 2 120 : CPrc 82 Trill 4/4 1 120 : Bass 83 Dubstep1* 4/4 2 96 SynthBass Bass 84 Dubstep2* 4/4 4 96 : Bass 85 ElecPop1* 4/4

(Maximum value depends on the tempo setting) 2. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137. 01V—Owner’s Manual Effects Parameters 155 Effects Parameters 155 Delay and reverb effects in series. Parameter Range Description DELAY L 0.0–1000.0 ms Left channel delay time NOTE L *1 Used in conjunction with TEMPO to determine left channel DELAY L FB.GAIN –99 to +99% Feedback gain (plus values for normal-phase feedback

*3. Die Stereo PHONES-Buchse ist asymmetrisch (Spitze = links, Ring = rechts, Mantel = Masse). * Im Falle des 2TR OUT-Pegels vertritt 0 dBV den Wert 1,00 Vrms. * Wenn “dB” einen Spannungswert vertritt, so entspricht 0dB dem Wert 0,775 Vrms. * STEREO OUT verwendet 20bit D/A-Wandler mit 8fachem Oversampling. * OMNI OUT 1~4 und MONITOR OUT verwenden 18-Bit-D/A-Wandler mit 8fachem Oversampling. 01V—Bedienungsanleitung Digitale Audio-Eingange Anschlu. Format Wortlange Pegel Anschlu.typ DIGITAL STEREO

TRANSMIT/RECEIVE DATA 1.1 CHANNEL MESSAGE 1.1.1 NOTE OFF (8n) Reception Received if [Rx CH] matches. Used for EFFECT control. See below for details. STATUS 1000nnnn 8n Note Off Message DATA 0nnnnnnn nn Note No. 0vvvvvvv vv Velocity ( ignored) 1.1.2 NOTE ON (9n) Reception Received if [Rx CH] matches. Used for EFFECT control. See below for details. A velocity of 0x00 is the same as NOTE OFF. STATUS 1001nnnn 9n Note On Message DATA 0nnnnnnn nn Note No. 0vvvvvvv vv Velocity ( 1-127:On, 0:off) * Usin

Selectable from STEREO/BUS/AUX/DIRECT/OUT/INSERT OUT/CASCADE OUT (STEREO, BUS1~8, AUX1~8, SOLO). Details depend on each interface card. 01V96 Version 2—Owner’s Manual Appendix 288 Appendix B: Specifications 288 Appendix B: Specifications c I/O Port Format Level Connector in Console TO HOST USB USB 0 V–3.3 V B type USB connector MIDI IN1 MIDI — DIN Connector 5P OUT MIDI — DIN Connector 5P THRU MIDI — DIN Connector 5P WORD CLOCK IN — TTL/75 . BNC Connector OUT — TTL/75 . BNC Connector 1. MIDI IN c

These preset programs are dedicated to Add-On Effects. The numbers for effects programs that do not have Add-On Effects installed are grayed-out and cannot be used. The following effects programs in the Effects library have been dedicated to the new Add-On Effects Packages. No. Preset name Type 54 Max100 MAX100 55 Vintage Phaser VNTG PHASER 56 Dual Phaser DUAL PHASER Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages: □ About the 01V96 Ed

For reception by the 01V96, only the user area is valid. (4-127, 256-) STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15 (Device number=MIDI Channel) FORMAT No. 01111110 7E Universal bulk dump COUNT HIGH 0ccccccc ch data count = ch * 128 + cl COUNT LOW 0ccccccc cl 01001100 4C ‘L’ 01001101 4D ‘M’ 00100000 20 ‘ ’ 00100000 20 ‘ ’ 00111000 38 ‘8’ 01000011 43 ‘C’ 00111001 39 ‘9’ 00110011 33 ‘3’ DATA NAME 01000111 47 ‘G’ 0mmmm

•Use of the software and this manual is governed by the Software Licensing Agreement which the purchaser fully agrees to upon breaking the seal of the software packaging. (Carefullyread the agreement at the end of this manual before installing the software.) •Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. •Yamaha makes no representations or warranties with regard to the use of the sof

E SELECT button This button is used to select the Stereo Out. If it’s clicked while the Remote Layer is selected, it will light up, but the Stereo Out will not appear in the Selected Channel window. F ON button This button turns the Stereo Out on and off. It appears orange while the Stereo Out is on. G Channel fader This is the Stereo Out fader. 1 2 3 5 6 7 4 3-1 5.1 6.1 Studio Manager for 01V96—Owner’s Manual Output Channels 13 Output Channels 13 When the Master Layer is selected, the Bus Out a

High Mid Low 59 NO ASSIGN 60 NO ASSIGN 61 NO ASSIGN 62 NO ASSIGN 63 NO ASSIGN 64 EQ HPF ON INPUT1 65 EQ HPF ON INPUT2 66 EQ HPF ON INPUT3 67 EQ HPF ON INPUT4 68 EQ HPF ON INPUT5 69 EQ HPF ON INPUT6 70 EQ HPF ON INPUT7 71 EQ HPF ON INPUT8 72 EQ HPF ON INPUT9 73 EQ HPF ON INPUT10 74 EQ HPF ON INPUT11 75 EQ HPF ON INPUT12 76 EQ HPF ON INPUT13 77 EQ HPF ON INPUT14 78 EQ HPF ON INPUT15 79 EQ HPF ON INPUT16 80 EQ HPF ON INPUT17 81 EQ HPF ON INPUT18 82 EQ HPF ON INPUT19 83 EQ HPF ON INPUT20 84 EQ HPF O