Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Computadores - HP Integrity NonStop H-Series (16.73 mb)
Computadores - HP Integrity NonStop H-Series (957.56 kb)
Computadores - HP Integrity NonStop H-Series (881.66 kb)
Computadores - HP Integrity NonStop H-Series (965.62 kb)
Computadores - HP Integrity NonStop H-Series (676.93 kb)
Computadores - HP Integrity NonStop H-Series (393.72 kb)
Computadores - HP Integrity NonStop H-Series (776.57 kb)
Facilidade de uso
Operating System
Fallback
• Before migrating to H06.06, HP recommends that H06.04 users install the DP2
fallback SPR T9053AQM in case a fallback becomes necessary. For additional
information on the SPR, see Fallback on page 2-6. T9053AQM is on the H06.05
SUT. Installing the T9053AQM SPR requires a system load.
• If you have a tape file with a mix of OSS files smaller than and larger than 2 GB
that need to be restored to a H06.05 file set that does not support files larger than
2 GB, install the Backup and Restore 2 SPR T0744H01^AAA to restore files
smaller than 2 GB and skip files larger than 2 GB. T0744H01^AAA does not
support pre-H06.05 RVUs. You cannot restore OSS files to H06.04 and earlier
systems.
Fallback
If you are falling back to H06.04, install DP2 SPR T9053AQM and DSAP/DCOM SPR
T9543H01^ABH.
If you are falling back to H06.05, install DSAP/DCOM SPR T9543H01^ABH and
Backup and Restore 2 SPR T0744H01^AAA.
DP2
If you are currently running the H06.04 RVU, HP recommends that, before migrating to
H06.06, you install DP2 fallback SPR T9053AQM. Installing this fallback SPR enables
you to, after fallback, access OSS files smaller than 2 GB that were created by the new
software. Installing the T9053AQM SPR requires a system load. T9053AQM is
included on the H06.05 SUT.
If the DP2 fallback SPR is not installed, you cannot use either OSS or Enscribe to
access any OSS file that has an underlying Guardian file format of Format 2, even if
the files are smaller than 2 GB.
If the T9053AQM DP2 fallback SPR is installed:
• OSS files smaller than approximately 2 GB are converted to use an underlying
Guardian file format of Format 1 when opened, so that the files remain accessible
using 32-bit APIs. The file size cannot exceed the limit of approximately 2 GB.
• OSS files larger than 2 GB are no longer accessible through the OSS file system
and utilities, and DP2 returns errors for any operation other than purging them.
However, you can use Enscribe with 64-bit elections to access the files from
Guardian.
• A file smaller than 2 GB that was converted to Format 2 on H06.06 appears initially
to most utilities (except DSAP/DCOM T9543H01^ABH) as a zero-size Format 2 file
after fallback. When the file is accessed for the first time after the fallback, it is
converted to Format 1 and shows its actual size.
If you did not install the DP2 fallback SPR before migrating to H06.06, you can still
install the SPR upon fallback to take advantage of its benefits.
H06.06 Release Version Update Compendium — 542486-001
2 -6
... Este manual também é adequado para os modelos :
Computadores - HP Integrity NonStop Release and Migration (107.95 kb)